# ./chkrootkit -x > chkrootkit_advanced.output ROOTDIR is `/' not found ### ### Output of: /usr/bin/strings -a /usr/bin/basename ### /lib/ld-linux.so.2 libc.so.6 stdout getopt_long __fpending memcpy puts __overflow mbrtowc malloc opterr abort iswprint calloc __ctype_get_mb_cur_max fputs_unlocked dcgettext optind realloc memset fclose setlocale stderr error __ctype_b_loc __errno_location bindtextdomain _IO_stdin_used __libc_start_main strlen vfprintf free mbsinit __cxa_atexit __gmon_start__ GLIBC_2.3 GLIBC_2.1.3 GLIBC_2.1 GLIBC_2.0 GLIBC_2.2 PTRh 8v'9 [^_] |[^_] [^_] [^_] [^_] Try `%s --help' for more information. Usage: %s NAME [SUFFIX] or: %s OPTION Print NAME with any leading directory components removed. If specified, also remove a trailing SUFFIX. --help display this help and exit --version output version information and exit Report bugs to <%s>. bug-coreutils@gnu.org basename /usr/share/locale FIXME unknown 5.2.1 GNU coreutils too many arguments too few arguments write error %s: %s help version literal shell shell-always escape clocale Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by %s, %s, %s, and %s. Written by %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, %s, and others. %s (%s) %s Written by %s. Written by %s and %s. Written by %s, %s, and %s. %s %s memory exhausted .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /bin/ls -l /usr/bin/basename ### -rwxr-xr-x 1 root root 12728 Jul 16 2004 /usr/bin/basename not found ### ### Output of: /usr/bin/strings -a /usr/bin/chfn ### /lib/ld-linux.so.2 libcrypt.so.1 _Jv_RegisterClasses __gmon_start__ libpam.so.0 _DYNAMIC pam_chauthtok pam_authenticate _init pam_setcred pam_acct_mgmt _fini _GLOBAL_OFFSET_TABLE_ pam_start libpam_misc.so.0 misc_conv libc.so.6 strcpy utime getlogin connect snprintf ulckpwdf fchmod __strtol_internal getpid qsort fchown fgets setrlimit getuid feof malloc sleep optarg socket __strtoul_internal fflush rename strrchr write fprintf kill strcat dcgettext optind stdin umask signal read openlog closelog strncmp strncpy unlink strcasecmp realloc __strdup _IO_getc getopt memset syslog strcmp getpwuid getpwnam sprintf fclose setlocale stderr fsync __ctype_b_loc access __xstat rewind __errno_location exit __fxstat bindtextdomain fopen _IO_putc fileno _IO_stdin_used __libc_start_main strlen strchr fputs putpwent setuid free __environ _edata __bss_start _end GLIBC_2.3 GLIBC_2.1 GLIBC_2.2 GLIBC_2.0 PTRh@ %s MAIL X-Cron-Env: <%s> execl: couldn't exec `%s' execl can't vfork this program was compiled without debugging enabled '%s' is not a directory, bailing out. cannot chdir(%s), bailing out. can't lock %s, otherpid may be %d: %s seteuid /var/spool/cron %s: created %s: mkdir /var/run/ %scrond.pid can't open or create %s: %s %s: %s pidfile fd = %d /etc/cron.allow /etc/cron.deny (%s) %s (%s) \%03o %[^ =] = %[^ popen: setuid(%lu) failed: %s $Id: cron.c,v 2.11 1994/01/15 20:43:43 vixie Exp $ $Id: database.c,v 2.8 1994/01/15 20:43:43 vixie Exp $ $Id: user.c,v 2.8 1994/01/15 20:43:43 vixie Exp $ $Id: entry.c,v 2.12 1994/01/17 03:20:37 vixie Exp $ $Id: job.c,v 1.6 1994/01/15 20:43:43 vixie Exp $ $Id: do_command.c,v 2.12 1994/01/15 20:43:43 vixie Exp $ $Id: misc.c,v 2.9 1994/01/15 20:43:43 vixie Exp $ $Id: env.c,v 2.7 1994/01/26 02:25:50 vixie Exp vixie $ $Id: popen.c,v 1.5 1994/01/15 20:43:43 vixie Exp $ @(#)popen.c 5.7 (Berkeley) 2/14/89 $Id: compat.c,v 1.6 1994/01/15 20:43:43 vixie Exp $ .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /usr/bin/strings -a /bin/date ### /lib/ld-linux.so.2 librt.so.1 clock_gettime clock_settime _Jv_RegisterClasses __gmon_start__ libc.so.6 putchar strcpy asctime stdout getopt_long __fpending getenv __strtol_internal __getdelim memcpy puts __overflow mbrtowc malloc optarg settimeofday putenv abort iswprint __ctype_tolower_loc calloc __ctype_get_mb_cur_max fputs_unlocked dcgettext nl_langinfo optind stdin strncmp realloc __xstat64 gettimeofday localtime memset strcmp fclose setlocale stderr error __ctype_b_loc strftime __errno_location bindtextdomain __ctype_toupper_loc _IO_stdin_used gmtime __libc_start_main strlen strchr vfprintf free mbsinit fopen64 __cxa_atexit GLIBC_2.2 GLIBC_2.1.3 GLIBC_2.1 GLIBC_2.3 GLIBC_2.0 PTRh0 QVh` ,[^_] \[^_] [^_] t?~! [^_] :.t2FB L[^_] [^_] tYr4 [^_] [^_] [^_] [^_] wN1 gfff gfff [^_] ,[^_] ,[^_] [^_] [^_] |[^_] [^_] [^_] [^_] [^_] [^_] (^_] 0^_] w@t9 [^_] hours minutes seconds file reference rfc-822 rfc-2822 universal help version Report bugs to <%s>. bug-coreutils@gnu.org invalid date `%s' standard input Rd:f:r:s:uI:: Rd:f:r:s:uI: coreutils /usr/share/locale 5.2.1 David MacKenzie --iso-8601 TZ=UTC0 undefined cannot set date cannot get time of day ... %Y-%m-%d %Y-%m-%dT%H%z %Y-%m-%dT%H:%M%z %Y-%m-%dT%H:%M:%S%z time %s is out of range %a, %d %b %Y %H:%M:%S %z %a %b %e %H:%M:%S %Z %Y Try `%s --help' for more information. Usage: %s [OPTION]... [+FORMAT] or: %s [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]] Display the current time in the given FORMAT, or set the system date. -d, --date=STRING display time described by STRING, not `now' -f, --file=DATEFILE like --date once for each line of DATEFILE -ITIMESPEC, --iso-8601[=TIMESPEC] output date/time in ISO 8601 format. TIMESPEC=`date' for date only, `hours', `minutes', or `seconds' for date and time to the indicated precision. --iso-8601 without TIMESPEC defaults to `date'. -r, --reference=FILE display the last modification time of FILE -R, --rfc-2822 output RFC-2822 compliant date string -s, --set=STRING set time described by STRING -u, --utc, --universal print or set Coordinated Universal Time --help display this help and exit --version output version information and exit FORMAT controls the output. The only valid option for the second form specifies Coordinated Universal Time. Interpreted sequences are: %% a literal % %a locale's abbreviated weekday name (Sun..Sat) %A locale's full weekday name, variable length (Sunday..Saturday) %b locale's abbreviated month name (Jan..Dec) %B locale's full month name, variable length (January..December) %c locale's date and time (Sat Nov 04 12:02:33 EST 1989) %C century (year divided by 100 and truncated to an integer) [00-99] %d day of month (01..31) %D date (mm/dd/yy) %e day of month, blank padded ( 1..31) %F same as %Y-%m-%d %g the 2-digit year corresponding to the %V week number %G the 4-digit year corresponding to the %V week number %h same as %b %H hour (00..23) %I hour (01..12) %j day of year (001..366) %k hour ( 0..23) %l hour ( 1..12) %m month (01..12) %M minute (00..59) %n a newline %N nanoseconds (000000000..999999999) %p locale's upper case AM or PM indicator (blank in many locales) %P locale's lower case am or pm indicator (blank in many locales) %r time, 12-hour (hh:mm:ss [AP]M) %R time, 24-hour (hh:mm) %s seconds since `00:00:00 1970-01-01 UTC' (a GNU extension) %S second (00..60); the 60 is necessary to accommodate a leap second %t a horizontal tab %T time, 24-hour (hh:mm:ss) %u day of week (1..7); 1 represents Monday %U week number of year with Sunday as first day of week (00..53) %V week number of year with Monday as first day of week (01..53) %w day of week (0..6); 0 represents Sunday %W week number of year with Monday as first day of week (00..53) %x locale's date representation (mm/dd/yy) %X locale's time representation (%H:%M:%S) %y last two digits of year (00..99) %Y year (1970...) %z RFC-2822 style numeric timezone (-0500) (a nonstandard extension) %Z time zone (e.g., EDT), or nothing if no time zone is determinable By default, date pads numeric fields with zeroes. GNU date recognizes the following modifiers between `%' and a numeric directive. `-' (hyphen) do not pad the field `_' (underscore) pad the field with spaces a format string may not be specified when using the --rfc-2822 (-R) option the argument `%s' lacks a leading `+'; When using an option to specify date(s), any non-option argument must be a format string beginning with `+'. too many non-option arguments: %s%s the options to print and set the time may not be used together the options to specify dates for printing are mutually exclusive *-0'3$ '()*+,0- 9!"#342:5;67A8 syntax error parser stack overflow A.M. P.M. JANUARY FEBRUARY MARCH APRIL JUNE JULY AUGUST SEPTEMBER SEPT OCTOBER NOVEMBER DECEMBER SUNDAY MONDAY TUESDAY TUES WEDNESDAY WEDNES THURSDAY THUR THURS FRIDAY SATURDAY YEAR MONTH FORTNIGHT WEEK HOUR MINUTE SECOND TOMORROW YESTERDAY TODAY LAST THIS NEXT FIRST THIRD FOURTH FIFTH SIXTH SEVENTH EIGHTH NINTH TENTH ELEVENTH TWELFTH WEST BRST CLST AKST AKDT HAST HADT CEST MEST MESZ EEST SAST NZST NZDT _POSIX2_VERSION %m/%d/%y %H:%M %H:%M:%S ambiguous argument %s for %s invalid argument %s for %s Valid arguments are: - `%s' , `%s' write error %s: %s literal shell shell-always escape clocale Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by %s, %s, %s, and %s. Written by %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, %s, and others. %s (%s) %s Written by %s. Written by %s and %s. Written by %s, %s, and %s. %s %s memory exhausted .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame_hdr .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /bin/ls -l /bin/date ### -rwxr-xr-x 1 root root 42764 Jul 16 2004 /bin/date ### ### Output of: /usr/bin/strings -a /usr/bin/du ### /lib/ld-linux.so.2 libc.so.6 stdout readdir64 __strtoull_internal memmove getopt_long __fpending fts_set getenv __strtol_internal qsort fchdir memcpy __overflow mbrtowc malloc optarg fts_open localeconv strncasecmp abort iswprint strrchr calloc __ctype_get_mb_cur_max fputs_unlocked dcgettext optind stdin fnmatch dirfd strncmp strcasecmp realloc __xstat64 memset opendir __uflow __assert_fail strcmp sprintf fclose setlocale stderr error __lxstat64 fts_read __ctype_b_loc fflush_unlocked __errno_location bindtextdomain fts_close _IO_stdin_used __libc_start_main strlen strchr fts_children closedir __fxstat64 vfprintf free mbsinit fopen64 __cxa_atexit __gmon_start__ GLIBC_2.3 GLIBC_2.2.3 GLIBC_2.1.3 GLIBC_2.1 GLIBC_2.0 GLIBC_2.2 PTRh@ L[^_] L[^_] v<;5 [^_] [^_] [^_] [^_] 90t2 [^_] [^_] Ss91 [^_] [^_] [^_] ,[^_] ,[^_] t%;} ,[^_] ,[^_] [^_] [^_] SBfJ [^_] GBfHt CBfHt fJu@ @( u L[^_] [^_] [^_] [^_] r 9u [^_] r ;E ,0< v ,0< w shIt |[^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] ,[^_] ,[^_] [^_] ^_] 0^_] w@t9 [^_] apparent-size block-size count-links dereference-args exclude exclude-from human-readable kilobytes max-depth null megabytes no-dereference one-file-system separate-dirs summarize total help version Report bugs to <%s>. bug-coreutils@gnu.org %s%c cannot read directory %s cannot access %s process_file du.c fts_read failed /usr/share/locale coreutils DU_BLOCK_SIZE 0abchHklmsxB:DLPSX: 5.2.1 Jim Meyering David MacKenzie, Paul Eggert Torbjorn Granlund invalid maximum depth %s Try `%s --help' for more information. Usage: %s [OPTION]... [FILE]... Summarize disk usage of each FILE, recursively for directories. Mandatory arguments to long options are mandatory for short options too. -a, --all write counts for all files, not just directories --apparent-size print apparent sizes, rather than disk usage; although the apparent size is usually smaller, it may be larger due to holes in (`sparse') files, internal fragmentation, indirect blocks, and the like -B, --block-size=SIZE use SIZE-byte blocks -b, --bytes equivalent to `--apparent-size --block-size=1' -c, --total produce a grand total -D, --dereference-args dereference FILEs that are symbolic links -H like --si, but also evokes a warning; will soon change to be equivalent to --dereference-args (-D) -h, --human-readable print sizes in human readable format (e.g., 1K 234M 2G) --si like -h, but use powers of 1000 not 1024 -k like --block-size=1K -l, --count-links count sizes many times if hard linked -L, --dereference dereference all symbolic links -P, --no-dereference don't follow any symbolic links (this is the default) -0, --null end each output line with 0 byte rather than newline -S, --separate-dirs do not include size of subdirectories -s, --summarize display only a total for each argument -x, --one-file-system skip directories on different filesystems -X FILE, --exclude-from=FILE Exclude files that match any pattern in FILE. --exclude=PATTERN Exclude files that match PATTERN. --max-depth=N print the total for a directory (or file, with --all) only if it is N or fewer levels below the command line argument; --max-depth=0 is the same as --summarize -m like --block-size=1M [deprecated] --help display this help and exit --version output version information and exit SIZE may be (or may be an integer optionally followed by) one of following: kB 1000, K 1024, MB 1000*1000, M 1024*1024, and so on for G, T, P, E, Z, Y. (size_t) ent->fts_level == prev_level - 1 WARNING: use --si, not -H; the meaning of the -H option will soon change to be the same as that of --dereference-args (-D) cannot both summarize and show all entries warning: summarizing conflicts with --max-depth=%d warning: summarizing is the same as using --max-depth=0 # entries: %lu # buckets: %lu max bucket length: %lu # buckets used: %lu (%.2f%%) =fff? Owrite error %s: %s KMGTPEZY _%.1Lf %.0Lf POSIXLY_CORRECT eEgGkKmMpPtTyYzZ0 block size %s `%s' too large invalid %s `%s' invalid character following %s in `%s' literal shell shell-always escape clocale Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by %s, %s, %s, and %s. Written by %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, %s, and others. %s (%s) %s Written by %s. Written by %s and %s. Written by %s, %s, and %s. %s %s invalid argument: %s memory exhausted 0 <= strtol_base && strtol_base <= 36 xstrtol xstrtol.c xstrtoumax ambiguous argument %s for %s invalid argument %s for %s Valid arguments are: - `%s' , `%s' state->magic == 9827862 cycle_check cycle-check.c .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame_hdr .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /usr/bin/strings -a /usr/bin/dirname ### /lib/ld-linux.so.2 libc.so.6 stdout getopt_long __fpending memcpy __overflow mbrtowc malloc opterr abort iswprint calloc __ctype_get_mb_cur_max fputs_unlocked dcgettext optind realloc memset fclose setlocale stderr error __ctype_b_loc fwrite_unlocked __errno_location bindtextdomain _IO_stdin_used __libc_start_main strlen vfprintf free mbsinit __cxa_atexit __gmon_start__ GLIBC_2.3 GLIBC_2.1.3 GLIBC_2.1 GLIBC_2.0 GLIBC_2.2 PTRhP |[^_] [^_] [^_] [^_] Try `%s --help' for more information. Usage: %s NAME or: %s OPTION Print NAME with its trailing /component removed; if NAME contains no /'s, output `.' (meaning the current directory). --help display this help and exit --version output version information and exit Report bugs to <%s>. bug-coreutils@gnu.org /usr/share/locale 5.2.1 Jim Meyering David MacKenzie GNU coreutils dirname too many arguments too few arguments .write error %s: %s help version literal shell shell-always escape clocale Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by %s, %s, %s, and %s. Written by %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, %s, and others. %s (%s) %s Written by %s. Written by %s and %s. Written by %s, %s, and %s. %s %s memory exhausted .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /bin/ls -l /usr/bin/dirname ### -rwxr-xr-x 1 root root 12856 Jul 16 2004 /usr/bin/dirname ### ### Output of: /usr/bin/strings -a /bin/echo ### /lib/ld-linux.so.2 libc.so.6 stdout getopt_long __fpending getenv memcpy __overflow mbrtowc malloc opterr abort iswprint strrchr calloc __ctype_get_mb_cur_max fputs_unlocked dcgettext optind realloc memset fclose setlocale stderr error __ctype_b_loc __errno_location bindtextdomain _IO_stdin_used __libc_start_main strlen vfprintf free mbsinit __cxa_atexit __gmon_start__ GLIBC_2.3 GLIBC_2.1.3 GLIBC_2.1 GLIBC_2.0 GLIBC_2.2 PTRh . bug-coreutils@gnu.org /usr/share/locale POSIXLY_CORRECT FIXME unknown 5.2.1 GNU coreutils echo write error %s: %s help version literal shell shell-always escape clocale Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by %s, %s, %s, and %s. Written by %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, %s, and others. %s (%s) %s Written by %s. Written by %s and %s. Written by %s, %s, and %s. %s %s memory exhausted .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /bin/ls -l /bin/echo ### -rwxr-xr-x 1 root root 13912 Jul 16 2004 /bin/echo ### ### Output of: /usr/bin/strings -a /bin/egrep ### #!/bin/sh exec grep -E ${1+"$@"} ### ### Output of: /bin/ls -l /bin/egrep ### -rwxr-xr-x 1 root root 33 Nov 21 21:54 /bin/egrep ### ### Output of: /usr/bin/strings -a /usr/bin/env ### /lib/ld-linux.so.2 libc.so.6 stdout getopt_long __fpending memcpy puts __overflow mbrtowc malloc optarg putenv abort iswprint calloc __ctype_get_mb_cur_max fputs_unlocked dcgettext optind realloc memset fclose setlocale stderr error __ctype_b_loc __errno_location bindtextdomain _IO_stdin_used __libc_start_main strlen strchr execvp vfprintf free mbsinit __environ __cxa_atexit __gmon_start__ GLIBC_2.3 GLIBC_2.1.3 GLIBC_2.1 GLIBC_2.0 GLIBC_2.2 PTRhp |[^_] [^_] [^_] [^_] ignore-environment unset help version Report bugs to <%s>. bug-coreutils@gnu.org coreutils /usr/share/locale +iu: Richard Mlynarik 5.2.1 David MacKenzie Try `%s --help' for more information. Usage: %s [OPTION]... [-] [NAME=VALUE]... [COMMAND [ARG]...] Set each NAME to VALUE in the environment and run COMMAND. -i, --ignore-environment start with an empty environment -u, --unset=NAME remove variable from the environment --help display this help and exit --version output version information and exit A mere - implies -i. If no COMMAND, print the resulting environment. write error %s: %s literal shell shell-always escape clocale Copyright (C) 2004 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Written by %s, %s, %s, and %s. Written by %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, and %s. Written by %s, %s, %s, %s, %s, %s, %s, %s, %s, and others. %s (%s) %s Written by %s. Written by %s and %s. Written by %s, %s, and %s. %s %s memory exhausted .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /bin/ls -l /usr/bin/env ### -rwxr-xr-x 1 root root 13048 Jul 16 2004 /usr/bin/env ### ### Output of: /usr/bin/strings -a /usr/bin/find ### /lib/ld-linux.so.2 _Jv_RegisterClasses __gmon_start__ libc.so.6 strcpy waitpid stdout readdir64 __strtoull_internal getgrgid getenv __strtol_internal fchdir memcpy readlink __overflow mbrtowc malloc endpwent readdir re_match __strtoul_internal fflush abort iswprint strrchr __ctype_tolower_loc calloc __ctype_get_mb_cur_max fprintf ctime re_compile_pattern dcgettext __stpcpy endgrent stdin fnmatch umask strstr signal strncmp strncpy realloc fork setmntent endmntent __xstat64 localtime memset opendir __uflow __assert_fail strcmp getpwuid getcwd getpwnam sprintf setlocale stderr error __ctype_b_loc strftime getmntent fwrite __xstat __errno_location bindtextdomain rpmatch getgrnam _IO_putc _IO_stdin_used _exit strspn __libc_start_main strlen strchr fputs execvp closedir close free mbsinit fopen64 __lxstat64 GLIBC_2.1 GLIBC_2.2.3 GLIBC_2.3 GLIBC_2.2 GLIBC_2.0 PTRh [^_] [^_] [^_] :0tV >-t@ [^_] [^_] ,[^_] <{t|B t6r% @$9A@~ @$9A@} ]9P@ t?r- @$9A@~ @$9A@} t6r% @$9AP~ @$9AP} ]9PP t?r- @$9AP~ @$9AP} [^_] [^_] ;/t t\r3 t\r3 t\r3 t6r% @$9AH~ @$9AH} t?r- @$9AH~ @$9AH} ]9PH tXr/ [^_] G$9U G$9U t\r3 P@+PP t9r' ;Q$~ ;Q$} [^_] ,[^_] t`wNKtB tLrl [^_] ,!<]w) z xt B T] [^_] 93tN [^_] [^_] 93tN [^_] [^_] [^_] 8t$1 [^_] [^_] [^_] [^_] [^_] ,[^_] [^_] ,[^_] ,[^_] [^_] |[^_] [^_] (^_] 0^_] w@t9 ^_] 0^_] w@t9 [^_] /usr/share/locale findutils FIND_BLOCK_SIZE -!(), missing argument to `%s' cannot get current directory invalid argument `%s' to `%s' invalid predicate `%s' paths must precede expression virtual memory exhausted %s changed during execution of %s %s/.. changed during execution of %s /etc/mtab ignore unknown dev= error in %s: %s amin anewer atime cmin cnewer ctime daystart empty exec false follow fprint fprint0 fprintf fstype -help ilname iname inum ipath iregex links maxdepth mindepth mmin mount mtime noleaf nogroup nouser perm prune true used -version xdev xtype 0123456789 invalid mode `%s' invalid -size type `%c' GNU find version %s -+ # abcdfFgGhHiklmnpPstuU /dev/stderr /dev/stdout Usage: %s [path...] [expression] default path is the current directory; default expression is -print expression may consist of: operators (decreasing precedence; -and is implicit where no others are given): ( EXPR ) ! EXPR -not EXPR EXPR1 -a EXPR2 EXPR1 -and EXPR2 EXPR1 -o EXPR2 EXPR1 -or EXPR2 EXPR1 , EXPR2 options (always true): -daystart -depth -follow --help -maxdepth LEVELS -mindepth LEVELS -mount -noleaf --version -xdev tests (N can be +N or -N or N): -amin N -anewer FILE -atime N -cmin N -cnewer FILE -ctime N -empty -false -fstype TYPE -gid N -group NAME -ilname PATTERN -iname PATTERN -inum N -ipath PATTERN -iregex PATTERN -links N -lname PATTERN -mmin N -mtime N -name PATTERN -newer FILE -nouser -nogroup -path PATTERN -perm [+-]MODE -regex PATTERN -size N[bckw] -true -type [bcdpfls] -uid N -used N -user NAME -xtype [bcdpfls] actions: -exec COMMAND ; -fprint FILE -fprint0 FILE -fprintf FILE FORMAT -ok COMMAND ; -print -print0 -printf FORMAT -prune -ls Report bugs to . invalid null argument to -size warning: unrecognized format directive `%%%c' warning: unrecognized escape `\%c' < %s ... %s > ? error waiting for %s %s terminated by signal %d cannot fork invalid expression oops -- invalid expression type! oops -- invalid default insertion of and! %s: %s 4.1.20 %6s %4s %s %3lu %-8.8s %8s %b %e %H:%M %b %e %Y -> %*s %*s%s %-8lu \%03o KMGTPEZY _%.1f%s %.0f%s %.0f human-readable POSIXLY_CORRECT eEgGkKmMpPtTyYzZ0 block size %s `%s' too large invalid %s `%s' invalid character following %s in `%s' memory exhausted 0 <= strtol_base && strtol_base <= 36 xstrtoul xstrtol.c xstrtoumax ambiguous argument %s for %s invalid argument %s for %s Valid arguments are: - `%s' , `%s' literal shell shell-always escape clocale .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame_hdr .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss not found not found ### ### Output of: /usr/bin/strings -a /bin/grep ### /lib/ld-linux.so.2 _Jv_RegisterClasses __gmon_start__ libc.so.6 putchar stpcpy strcpy stdout readdir64 __strtoull_internal __mbrlen memmove getopt_long getenv getpagesize error_at_line memcpy puts mbrtowc iswlower feof malloc isatty optarg _obstack_newchunk re_match error_message_count fflush abort wcscoll error_print_progname strrchr __ctype_tolower_loc _obstack_begin calloc __ctype_get_mb_cur_max re_compile_pattern dcgettext optind memchr stdin fnmatch ferror iswctype strcoll strncmp strncpy strcasecmp realloc towupper _IO_getc fread __xstat64 regcomp memset regexec opendir __assert_fail strcmp fclose strerror_r setlocale stderr mmap64 obstack_free fputc __ctype_b_loc iswupper re_set_syntax fwrite re_search __errno_location towlower bindtextdomain iswalnum error_one_per_line _IO_putc __ctype_toupper_loc _IO_stdin_used __libc_start_main strlen lseek64 regfree strchr closedir wcrtomb __fxstat64 vfprintf mbsinit fopen64 __cxa_atexit GLIBC_2.2.3 GLIBC_2.1.3 GLIBC_2.1 GLIBC_2.3 GLIBC_2.2 GLIBC_2.0 PTRh [^_] l[^_] | ;E [^_] \[^_] ,[^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] uQF;s [^_] J4@9 [^_] >]t& alph [^_] 8)t> _t(C [^_] [^_] [^_] [^_] X[^_] [^_] [^_] _<9] <[^_] ,[^_] WD;\ WD;\ CD}u \[^_] [^_] B8;H B8;x WD;t @u(1 JL9M [^_] [^_] [^_] [^_] [^_] y>C;^ C;^,| C;^$| r8;| <[^_] ,[^_] \[^_] tqF;u L[^_] ,[^_] ;x<}"1 ;y<| utG9 [^_] ;y0}r ;s$|b ;s,|4 ;z0| ;s,| ;s$| [^_] [^_] [^_] [^_] [^_] \[^_] G 9E G 9E \[^_] [^_] ;A4} ;B8~ [^_] [^_] [^_] [^_] tD;] [^_] [^_] ,[^_] ,[^_] ,[^_] |[^_] L[^_] [^_] [^_] >F;u [^_] |[^_] [^_] vI9} <[^_] [^_] [^_] <[^_] 0^_] w@t9 ^_] 0^_] w@t9 [^_] 01;31 after-context basic-regexp before-context binary-files byte-offset color colour devices directories extended-regexp exclude exclude-from file files-with-matches files-without-match fixed-regexp fixed-strings help include ignore-case label line-buffered line-number line-regexp max-count mmap no-filename no-messages null null-data only-matching perl-regexp quiet recursive invert-match silent binary unix-byte-offsets version with-filename word-regexp lseek fstat input is too large to count [00m [%sm writing output %s%c Binary file %s matches (standard input) warning: %s: %s recursive directory loop egrep fgrep /usr/share/locale GREP_OPTIONS read skip unknown devices method perl recurse unknown directories method invalid max count unknown binary-files type force TERM dumb never none auto if-tty default %s (GNU grep) %s 2.5.1 GREP_COLOR 0123456789A:B:C:D:EFGHIPUVX:abcd:e:f:hiKLlm:noqRrsuvwxyZz invalid context length argument Usage: %s [OPTION]... PATTERN [FILE]... Try `%s --help' for more information. Usage: %s [OPTION]... PATTERN [FILE] ... Search for PATTERN in each FILE or standard input. Example: %s -i 'hello world' menu.h main.c Regexp selection and interpretation: -E, --extended-regexp PATTERN is an extended regular expression -F, --fixed-strings PATTERN is a set of newline-separated strings -G, --basic-regexp PATTERN is a basic regular expression -P, --perl-regexp PATTERN is a Perl regular expression -e, --regexp=PATTERN use PATTERN as a regular expression -f, --file=FILE obtain PATTERN from FILE -i, --ignore-case ignore case distinctions -w, --word-regexp force PATTERN to match only whole words -x, --line-regexp force PATTERN to match only whole lines -z, --null-data a data line ends in 0 byte, not newline Miscellaneous: -s, --no-messages suppress error messages -v, --invert-match select non-matching lines -V, --version print version information and exit --help display this help and exit --mmap use memory-mapped input if possible Output control: -m, --max-count=NUM stop after NUM matches -b, --byte-offset print the byte offset with output lines -n, --line-number print line number with output lines --line-buffered flush output on every line -H, --with-filename print the filename for each match -h, --no-filename suppress the prefixing filename on output --label=LABEL print LABEL as filename for standard input -o, --only-matching show only the part of a line matching PATTERN -q, --quiet, --silent suppress all normal output --binary-files=TYPE assume that binary files are TYPE TYPE is 'binary', 'text', or 'without-match' -a, --text equivalent to --binary-files=text -I equivalent to --binary-files=without-match -d, --directories=ACTION how to handle directories ACTION is 'read', 'recurse', or 'skip' -D, --devices=ACTION how to handle devices, FIFOs and sockets ACTION is 'read' or 'skip' -R, -r, --recursive equivalent to --directories=recurse --include=PATTERN files that match PATTERN will be examined --exclude=PATTERN files that match PATTERN will be skipped. --exclude-from=FILE files that match PATTERN in FILE will be skipped. -L, --files-without-match only print FILE names containing no match -l, --files-with-matches only print FILE names containing matches -c, --count only print a count of matching lines per FILE -Z, --null print 0 byte after FILE name Context control: -B, --before-context=NUM print NUM lines of leading context -A, --after-context=NUM print NUM lines of trailing context -C, --context=NUM print NUM lines of output context -NUM same as --context=NUM --color[=WHEN], --colour[=WHEN] use markers to distinguish the matching string WHEN may be `always', `never' or `auto'. -U, --binary do not strip CR characters at EOL (MSDOS) -u, --unix-byte-offsets report offsets as if CRs were not there (MSDOS) `egrep' means `grep -E'. `fgrep' means `grep -F'. With no FILE, or when FILE is -, read standard input. If less than two FILEs given, assume -h. Exit status is 0 if match, 1 if no match, and 2 if trouble. Report bugs to . conflicting matchers specified This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Copyright 1988, 1992-1999, 2000, 2001 Free Software Foundation, Inc. Memory exhausted Unbalanced [ upper lower :alpha:] :upper:] :lower:] :digit:] :xdigit:] :space:] :punct:] :alnum:] :print:] :graph:] :cntrl:] :blank:] Unfinished \ escape unfinished repeat count malformed repeat count Unbalanced ( Unbalanced ) No syntax specified out of memory memory exhausted \(^\|[^[:alnum:]_]\)\( \)\([^[:alnum:]_]\|$\) (^|[^[:alnum:]_])( )([^[:alnum:]_]|$) default grep egrep fgrep perl The -P option is not supported write error %s: %s %s: %s:%d: POSIX literal shell shell-always clocale memory exhausted 0 <= strtol_base && strtol_base <= 36 xstrtoumax xstrtol.c .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame_hdr .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /bin/ls -l /bin/grep ### -rwxr-xr-x 1 root root 75692 Nov 21 21:54 /bin/grep ### ### Output of: /usr/bin/strings -a /sbin/hdparm ### /lib/ld-linux.so.2 _Jv_RegisterClasses __gmon_start__ libc.so.6 putchar ioctl stdout __strtol_internal fscanf shmat memcpy setitimer perror puts sleep fflush lseek strrchr calloc fprintf strcat shmdt shmget stdin read sscanf getitimer strcmp sprintf fclose stderr shmctl fsync __ctype_b_loc fwrite __errno_location exit fopen _IO_putc _IO_stdin_used __libc_start_main strlen GLIBC_2.3 GLIBC_2.2 GLIBC_2.1 GLIBC_2.0 PTRh [^_] l[^_] v ;] l[^_] [^] [^_] ,0< w <9v<<`v 15uSec SpinMotCtl Fixed Removeable DTR<=5Mbs DTR>5Mbs DTR>10Mbs RotSpdTol>.5% dStbOff TrkOff FmtGapReq nonMagnetic slow medium fast eide unknown 1Sect DualPort DualPortCache %s%u %s%s Config={ BuffType= , LBA=%s IORDY= on/off PIO modes: %s AdvancedPM=%s : unknown setting enabled WriteCache=%s Drive conforms to: %s: unknown: : mode=0x%02X (%u) : disabled (255) UDMA modes: %s DMA modes: %s , tDMA={min:%u,rec:%u} udma7 udma6 udma5 udma4 udma3 udma2 udma1 udma0 , tPIO={min:%u,w/IORDY:%u} pio? pio4 pio3 mdma? mdma2 mdma1 mdma0 sdma? sdma2 sdma1 sdma0 , LBAsects=%u (maybe): pio0 pio2 pio1 , MultSect= ?%u? BLKFLSBUF failed lseek() failed read(%u) returned %u bytes read() failed O_DIRECT Timing %scached reads: shmctl(,IPC_RMID,) failed could not lock sharedmem buf BLKGETSIZE failed O_DIRECT Timing %s disk reads: buffered (on) (off) (tristate) (unknown: %d) %u seconds %u minutes %u hours illegal value 21 minutes 21 minutes + 15 seconds ?reserved vendor-specific pio0 pio1 pio2 pio3 pio4 pio5 pio6 pio7 sdma0 sdma1 sdma2 sdma3 sdma4 sdma5 sdma6 sdma7 mdma0 mdma1 mdma2 mdma3 mdma4 mdma5 mdma6 mdma7 udma0 udma1 udma2 udma3 udma4 udma5 udma6 udma7 default PIO mode PIO flow control mode%u singleword DMA mode%u multiword DMA mode%u unknown, probably not valid UltraDMA mode%u BLKROGET failed BLKRAGET failed HDIO_GET_ACOUSTIC failed BLKRRPART failed HDIO_GET_BUSSTATE failed busstate = %2ld HDIO_SET_BUSSTATE failed setting bus state to %d HDIO_GET_IDENTITY failed HDIO_TRISTATE_HWIF failed HDIO_DRIVE_RESET failed standby drive state is: %s active/idle sleeping HDIO_GETGEO failed readahead = %2ld readonly = %2ld HDIO_GET_NOWERR failed nowerr = %2ld keepsettings = %2ld HDIO_GET_QDMA failed queue_depth = %2ld using_dma = %2ld (DMA-Assisted-PIO) unmaskirq = %2ld IO_support =%3ld ( default 16-bit) 32-bit) 32-bit w/sync) ???) Request-Queue-Bypass) HDIO_GET_MULTCOUNT failed multcount = %2ld setting standby to %lu HDIO_DRIVE_CMD(sleep) failed issuing sleep command issuing standby command setting cdrom speed to %ld CDROM_SELECT_SPEED failed HDIO_DRIVE_CMD failed 0x%02lX (%ld) disabled setting xfermode to %d HDIO_SET_KEEPSETTINGS failed setting keep_settings to %ld HDIO_SET_NOWERR failed setting nowerr to %ld HDIO_SET_QDMA failed HDIO_SET_DMA failed setting using_dma to %ld HDIO_SET_UNMASKINTR failed setting unmaskirq to %ld BLKROSET failed setting readonly to %ld HDIO_SET_MULTCOUNT failed setting multcount to %ld HDIO_SET_32BIT failed HDIO_SET_PIO_MODE failed HDIO_SCAN_HWIF failed HDIO_UNREGISTER_HWIF failed BLKRASET failed setting fs readahead to %ld v5.8 bad char: '%c' 0x%02x --direct --Istdin --Istdout %s %s -A: missing value (0/1) -B: missing value (1-255) -D: missing value -s: missing value -K: missing value (0/1) -L: missing value (0/1) -P: missing value expected hwif_irq expected hwif_ctrl expected hwif_data -S: missing value expected hwif_nr -W: missing value (0/1) -X: missing value -x: missing value (0/1) Model=%.40s, FwRev=%.8s, SerialNo=%.20s RawCHS=%u/%u/%u, TrkSize=%u, SectSize=%u, ECCbytes=%u , BuffSize=%ukB, MaxMultSect=%u CurCHS=%u/%u/%u, CurSects=%lu * signifies the current active mode HDIO_DRIVE_CMD(null) (wait for flush complete) failed read() hit EOF - device too small %3u MB in %5.2f seconds = %6.2f MB/sec could not detach sharedmem buf %3u MB in %5.2f seconds = %6.2f kB/sec could not attach sharedmem buf could not allocate sharedmem buf default PIO mode, disable IORDY attempting to set MDMA mode to %d acoustic = %2ld (128=quiet ... 254=fast) HDIO_DRIVE_CMD:ACOUSTIC failed setting acoustic management to %d %04x %04x %04x %04x %04x %04x %04x %04x HDIO_DRIVE_CMD(identify) failed no identification info available HDIO_DRIVE_CMD(setidle1) failed HDIO_DRIVE_CMD(seagatepwrsave) failed disabling Seagate auto powersaving mode HDIO_DRIVE_CMD(standby) failed HDIO_DRIVE_CMD(setcache) failed setting drive write-caching to %ld setting Advanced Power Management level to HDIO_DRIVE_CMD(setreadahead) failed setting drive read-lookahead to %ld HDIO_DRIVE_CMD(setxfermode) failed HDIO_DRIVE_CMD(setprefetch) failed setting drive prefetch to %ld HDIO_DRIVE_CMD(defectmgmt) failed setting drive defect management to %ld HDIO_DRIVE_CMD(keepsettings) failed setting drive keep features to %ld HDIO_DRIVE_CMD(doorlock) failed setting drive doorlock to %ld setting DMA queue_depth to %ld setting 32-bit IO_support flag to %ld attempting to set UDMA mode to %d attempting to set PIO mode to %d attempting to auto-tune PIO mode attempting to scan hwif (0x%x, 0x%x, %u) attempting to unregister hwif#%u %s - get/set hard disk parameters - version %s Usage: %s [options] [device] .. Options: -a get/set fs readahead -A set drive read-lookahead flag (0/1) -b get/set bus state (0 == off, 1 == on, 2 == tristate) -B set Advanced Power Management setting (1-255) -c get/set IDE 32-bit IO setting -C check IDE power mode status -d get/set using_dma flag --direct use O_DIRECT to bypass page cache for timings -D enable/disable drive defect management -E set cd-rom drive speed -f flush buffer cache for device on exit -g display drive geometry -h display terse usage information -i display drive identification -I detailed/current information directly from drive --Istdin reads identify data from stdin as ASCII hex --Istdout writes identify data to stdout as ASCII hex -k get/set keep_settings_over_reset flag (0/1) -K set drive keep_features_over_reset flag (0/1) -L set drive doorlock (0/1) (removable harddisks only) -M get/set acoustic management (0-254, 128: quiet, 254: fast) (EXPERIMENTAL) -m get/set multiple sector count -n get/set ignore-write-errors flag (0/1) -p set PIO mode on IDE interface chipset (0,1,2,3,4,...) -P set drive prefetch count -q change next setting quietly -Q get/set DMA tagged-queuing depth (if supported) -r get/set device readonly flag (DANGEROUS to set) -R register an IDE interface (DANGEROUS) -S set standby (spindown) timeout -t perform device read timings -T perform cache read timings -u get/set unmaskirq flag (0/1) -U un-register an IDE interface (DANGEROUS) -v defaults; same as -mcudkrag for IDE drives -V display program version and exit immediately -w perform device reset (DANGEROUS) -W set drive write-caching flag (0/1) (DANGEROUS) -x tristate device for hotswap (0/1) (DANGEROUS) -X set IDE xfer mode (DANGEROUS) -y put IDE drive in standby mode -Y put IDE drive to sleep -Z disable Seagate auto-powersaving mode -z re-read partition table read(1279 bytes) failed (rc=%d) geometry = %u/%u/%u, sectors = %lld, start = %ld Direct-access device Sequential-access device Printer Processor Write-once device CD-ROM Scanner Optical memory Medium changer Communications device ACS-IT8 device Array controller Enclosure services Reduced block command device Optical card reader/writer Unknown hard sectored soft sectored not MFM encoded head switch time > 15us spindle motor control option fixed drive removable drive disk xfer rate <= 5Mbs disk xfer rate > 5Mbs rotational speed tol. data strobe offset option track offset option ATA-1 X3T9.2 781D revision 4 ATA-3 X3T10 2008D revision 1 ATA-2 X3T10 948D revision 2k ATA-3 X3T10 2008D revision 0 ATA-2 X3T10 948D revision 3 ATA-3 X3T10 2008D revision 6 Reserved reservedreservedreserved NOP cmd READ BUFFER cmd WRITE BUFFER cmd DEVICE RESET cmd SERVICE interrupt Release interrupt Look-ahead Write cache PACKET command feature set Power Management feature set Removable Media feature set Security Mode feature set SMART feature set FLUSH CACHE EXT command 48-bit Address feature set SET MAX security extension CFA feature set READ/WRITE DMA QUEUED DOWNLOAD MICROCODE cmd Media serial number SMART self-test SMART error logging locked frozen expired: security count supported: enhanced erase /proc/ide/%s/identify ATA device, with removable media Standards: Supported: & some of %u Configuration: Logical max current cylinders %u %u heads %u %u sectors/track %u %u (%llu GB) Capabilities: IORDY (can be disabled) Standard Max = %u Current = DMA: Cycle time: PIO: Security: not Checksum: correct CFA power mode 1: Maximum current = %uma HW reset results: CBLID- above Vih Device num = 0 determined by CSEL determined by the jumper Device num = 1 CBLID- below Vih Security level maximum high * IORDY flow control=%uns no flow control=%uns pio%d recommended=%uns min=%uns Interleaved DMA support sdma%u unknown setting (0x%04x) %u (0x%x) device specific minimum , no Vendor Can perform double-word IO Overlap support: %uus to release bus. ATA sw reset required Queue depth: %u bytes avail on r/w long: %u Buffer size: %.1fkB Buffer type: %04x: single port, single-sector with read caching ability dual port, multi-sector (cannot (may be) IORDY not likely LBA, Cmd overlap, Cmd queuing, bytes/track: %u bytes/sector: %u CHS addressing not supported DRQ response: unknown. Packet size: 16 bytes 12 bytes 3ms. 50us. <=10ms with INTRQ Likely used: %u Used: Supported: CD-ROM ATAPI Likely used CD-ROM ATAPI-1 -%u %-20s Media Manufacturer: Media Serial Num: Firmware Revision: Serial Number: Model Number: non- ATAPI %s, with %04x *%cdma%u disk xfer rate > 5Mbs, <= 10Mbs format speed tolerance gap reqd device does not report version ATA-1 X3T9.2 781D prior to revision 4 ATA-1 published, ANSI X3.221-1994 ATA-2 published, ANSI X3.279-1996 ATA-2 X3T10 948D prior to revision 2k ATA-3 published, ANSI X3.298-199x ATA-3 X3T13 2008D revision 7 and 7a ATA/ATAPI-4 X3T13 1153D revision 6 ATA/ATAPI-4 T13 1153D revision 13 ATA/ATAPI-4 X3T13 1153D revision 7 ATA/ATAPI-4 T13 1153D revision 18 ATA/ATAPI-4 T13 1153D revision 15 ATA/ATAPI-4 published, ANSI NCITS 317-1998 ATA/ATAPI-5 T13 1321D revision 3 ATA/ATAPI-4 T13 1153D revision 14 ATA/ATAPI-5 T13 1321D revision 1 ATA/ATAPI-5 published, ANSI NCITS 340-2000 ATA/ATAPI-4 T13 1153D revision 17 ATA/ATAPI-6 T13 1410D revision 0 ATA/ATAPI-6 T13 1410D revision 3a ATA/ATAPI-6 T13 1410D revision 2 ATA/ATAPI-6 T13 1410D revision 1 Host Protected Area feature set Mandatory FLUSH CACHE command Device Configuration Overlay feature set Automatic Acoustic Management feature set Address Offset Reserved Area Boot SET FEATURES subcommand required to spinup after power up Power-Up In Standby feature set Removable Media Status Notification feature set Advanced Power Management feature set General Purpose Logging feature set Media Card Pass Through Command feature set CHS current addressable sectors:%11u device size with M = 1024*1024: %11llu MBytes device size with M = 1000*1000: %11llu MBytes Standby timer values: spec'd by R/W multiple sector transfer: Master password revision code = %u %umin for SECURITY ERASE UNIT. %umin for ENHANCED SECURITY ERASE UNIT. and required by some commands Removable Media Status Notification feature set supported Commands/features: Enabled Supported: Recommended acoustic management value: %u, current value: %u Advanced power management level: %uus to clear BSY after SERVICE cmd. LBA user addressable sectors:%11u LBA48 user addressable sectors:%11llu Used: ATAPI for CD-ROMs, SFF-8020i, r2.5 WARNING: ID response incomplete. WARNING: Following data may be incorrect. powers-up in standby; SET FEATURES subcmd spins-up. Unknown device type: bits 15&14 of general configuration word 0 both set to 1. CompactFlash ATA device, with Input file wrong format or length .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame_hdr .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /usr/bin/strings -a /bin/su ### /lib/ld-linux.so.2 libcrypt.so.1 _Jv_RegisterClasses __gmon_start__ libpam.so.0 pam_get_item _DYNAMIC pam_end pam_authenticate pam_close_session _init pam_setcred pam_open_session pam_set_item pam_acct_mgmt _fini pam_strerror _GLOBAL_OFFSET_TABLE_ pam_start libpam_misc.so.0 misc_conv libc.so.6 strcpy chroot waitpid sysconf getlogin getopt_long snprintf getenv __strtol_internal fgets perror puts getuid malloc isatty endpwent optarg setgroups __strtoul_internal fflush putenv strrchr fprintf strcat dcgettext chdir initgroups optind umask setgid signal openlog closelog strncmp getusershell strncpy strcasecmp realloc __strdup strtok fork execv localtime endusershell getgroups syslog strcmp ttyname getpwuid getpwnam endspent sprintf fclose setlocale stderr __ctype_b_loc __errno_location exit bindtextdomain getgrnam fopen _IO_stdin_used __libc_start_main strlen strchr setusershell setuid free __environ _edata __bss_start GLIBC_2.3 GLIBC_2.1 GLIBC_2.0 PTRh0 [^_] 8*u! 8/tU [^_] [^_] [^_] [^_] 8/t' [^_] [^_] [^_] [^_] command preserve-environment shell help SU_NAME No shell Cannot execute %s Command line args too long SYSLOG_SU_ENAB Sorry. - %s %s:%s /usr/share/locale shadow c:mps:h /bin/sh %s: %s (Ignored) ENV_SUPATH CLOSE_SESSIONS USER su: fork failure: %m su: fork failure pam_open_session: %s %s: %s pam_setcred: %s + %s %s:%s IFS= PATH=/bin:/usr/bin ENV_PATH pam_acct_mgmt: %s pam_authenticate: %s Unknown id: %s pam_set_item: %s pam_start: error %d %s: pam_start: error %d ENV_TZ ENV_HZ TERM Unknown UID: %d There is no UID 0 user. /dev/ Usage: su [OPTS] [-] [username [ARGS]] - make this a login shell -c, --command= pass command to the invoked shell using its -c option -m, -p, --preserve-environment do not reset environment variables, and keep the same shell -s, --shell= use shell instead of the default in /etc/passwd pam_get_item: internal PAM error %s: Internal PAM error retrieving username %s: must be run from a terminal _RLD_= BASH_ENV= HOME= IFS= KRB_CONF= LIBPATH= MAIL= NLSPATH= SHELL= SHLIB_PATH= LANG= LANGUAGE= %s=%s Environment overflow You may not change $%s initgroups setgid setuid CONSOLE_GROUPS Warning: add_groups initgroups failed for user `%s': %m bad group ID `%d' for user `%s': %m bad user ID `%d' for user `%s': %m %s/%s LOGNAME QMAIL_DIR MAILDIR MAIL MAIL_FILE /var/mail DEFAULT_HOME Unable to cd to "%s" No directory, logging in with HOME=/ unable to cd to `%s' for user `%s' Can't change root directory to "%s" no subsystem root `%s' for user `%s' invalid root `%s' for user `%s' Invalid root directory "%s" SULOG_FILE SU %.02d/%.02d %.02d:%.02d %c %s %s-%s TZ=CST6CDT malloc(%d) failed Warning: too many groups Warning: unknown group %s CHFN_AUTH CHFN_RESTRICT CRACKLIB_DICTPATH CREATE_HOME DIALUPS_CHECK_ENAB ENVIRON_FILE ENV_ROOTPATH ERASECHAR FAILLOG_ENAB FAIL_DELAY FAKE_SHELL FTMP_FILE GETPASS_ASTERISKS GID_MAX GID_MIN HUSHLOGIN_FILE ISSUE_FILE KILLCHAR LASTLOG_ENAB LOGIN_RETRIES LOGIN_STRING LOGIN_TIMEOUT LOG_OK_LOGINS LOG_UNKFAIL_ENAB MAIL_CHECK_ENAB MD5_CRYPT_ENAB MOTD_FILE NOLOGINS_FILE NOLOGIN_STR NO_PASSWORD_CONSOLE OBSCURE_CHECKS_ENAB PASS_ALWAYS_WARN PASS_CHANGE_TRIES PASS_MAX_DAYS PASS_MAX_LEN PASS_MIN_DAYS PASS_MIN_LEN PASS_WARN_AGE PORTTIME_CHECKS_ENAB QUOTAS_ENAB SU_WHEEL_ONLY SYSLOG_SG_ENAB TTYGROUP TTYPERM TTYTYPE_FILE UID_MAX UID_MIN ULIMIT UMASK USERDEL_CMD USERGROUPS_ENAB Could not allocate space for config info. could not allocate space for config info configuration error - unknown item '%s' (notify administrator) unknown configuration item `%s' cannot open login definitions %s [%m] /bin/sh /etc/login.defs .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /usr/bin/strings -a /sbin/ifconfig ### /lib/ld-linux.so.2 libc.so.6 putchar strcpy ioctl getservent setservent strerror inet_pton snprintf __strtol_internal fscanf fgets perror malloc gethostbyaddr socket __strtoul_internal freeaddrinfo abort endprotoent getnameinfo getnetbyaddr uname strrchr calloc setprotoent fprintf strcat getprotoent ferror strstr strncmp strncpy strcasecmp realloc __strdup sscanf inet_aton index memset inet_ntoa herror strcmp __h_errno_location gethostbyname sprintf fclose setlocale stderr fputc __ctype_b_loc getaddrinfo fwrite access gettext getnetbyname __errno_location exit bindtextdomain inet_ntop fopen __ctype_toupper_loc endservent _IO_stdin_used __libc_start_main strlen strchr free __gmon_start__ GLIBC_2.3 GLIBC_2.1 GLIBC_2.0 PTRh [^_] [^_] [^_] <:t!B <-u> <-tUB 9FLt* [^_] [^_] [^_] [^_] VUUU [^_] [^_] [^_] [^_] [^_] VUUU [^_] [^_] H%@s [^_] ,0< w 8tu! L[^_] defa [^_] STAL HABL REAC NONE INCO MPLE PROB PERM NOAR FAIL DELA [^_] [^_] ;du& ;du. [^_] [^_] ,[^_] [^_] [^_] [^_] [^_] rBw rBw [^_] ,0< w ,0< w [^_] [^_] [^_] [^_] ,[^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] ^_] 0^_] w@t9 [^_] net-tools 1.60 ifconfig 1.42 (2001-04-13) SIOCSIFFLAGS [multicast] [[-]promisc] [txqueuelen ] [[-]dynamic] [up|down] ... =Hardware Type. inet SIOCSIFNETMASK: %s /usr/share/locale net-tools -arp media port auto port: SIOCSIFMAP port: SIOCGIFMAP Unknown media type. -trailers -promisc -multicast -allmulti down -dynamic metric SIOCSIFMETRIC: %s SIOCSIFMTU: %s keepalive SIOCSKEEPALIVE: %s outfill SIOCSOUTFILL: %s -broadcast SIOCSIFBRDADDR: %s dstaddr SIOCSIFDSTADDR: %s netmask txqueuelen SIOCSIFTXQLEN: %s mem_start mem_start: SIOCSIFMAP: %s mem_start: SIOCGIFMAP: %s io_addr io_addr: SIOCSIFMAP: %s io_addr: SIOCGIFMAP: %s irq: SIOCSIFMAP: %s irq: SIOCGIFMAP: %s -pointopoint SIOCSIFHWADDR: %s %s: invalid %s address. SIOCSIFADDR SIOGIFINDEX Interface %s not initialized SIOCDIFADDR: %s tunnel socket --version --help %s:%d Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg %s: ERROR while getting interface flags: %s No support for INET on this system. %s: ERROR while testing interface flags: %s Usage: ifconfig [-a] [-v] [-s] [[]
] [add
[/]] [del
[/]] [[-]broadcast [
]] [[-]pointopoint [
]] [netmask
] [dstaddr
] [tunnel
] [outfill ] [keepalive ] [hw
] [metric ] [mtu ] [[-]trailers] [[-]arp] [[-]allmulti] [mem_start ] [io_addr ] [irq ] [media ] List of possible hardware types: =Address family. Default: %s List of possible address families: WARNING: at least one error occured. (%d) hw address type `%s' has no handler to set address. failed. No support for INET6 on this system. No support for ECONET on this system. Don't know how to set addresses for family %d. ifconfig: `--help' gives usage information. ifconfig: Cannot set address for this protocol family. Warning: Interface %s still in POINTOPOINT mode. Warning: Interface %s still in BROADCAST mode. Warning: Interface %s still in DYNAMIC mode. Warning: Interface %s still in ALLMULTI mode. Warning: Interface %s still in MULTICAST mode. Warning: Interface %s still in promisc mode... maybe other application is running? ifconfig: option `%s' not recognised. netrom tcpip UNSPEC UNIX Domain DARPA Internet IPv6 AMPR AX.25 AMPR NET/ROM Novell IPX Appletalk DDP Econet CCITT X.25 AMPR ROSE Unknown address family `%s'. %s (%s) Please don't supply more than one address family. Too much address family arguments. Malformed Ash address [NONE SET] /proc/sys/net/ash Callsign too long Invalid callsign %s: %s /proc/net/ax25 %d/%d /proc/net/appletalk /proc/sys/net/econet Local Loopback VJ Serial Line IP VJ 6-bit Serial Line IP Adaptive Serial Line IP Ethernet HIPPI generic X.25 IPIP Tunnel Point-to-Point Protocol (Cisco)-HDLC LAPB ARCnet Frame Relay DLCI Frame Relay Access Device IPv6-in-IPv4 IrLAP 16/4 Mbps Token Ring 16/4 Mbps Token Ring (New) Generic EUI-64 Fiber Distributed Data Interface default netstat getaddrinfo: %s: %d getnameinfo failed [UNKNOWN] /proc/net/if_inet6 /proc/net/ipv6_route Kernel IPv6 routing table %s:%s:%s:%s:%s:%s:%s:%s /proc/net/ndisc Kernel IPv6 Neighbour Cache UNKNOWN(%02x) %-9ld %-7ld ND Table nd_print Destination Next Hop Flags Metric Ref Use Iface %4s%4s%4s%4s%4s%4s%4s%4s %02x %4s%4s%4s%4s%4s%4s%4s%4s %02x %4s%4s%4s%4s%4s%4s%4s%4s %08x %08x %08x %08x %s %-43s %-39s %-5s %-6d %-2d %7d %-8s INET6 (IPv6) not configured in this system. Neighbour HW Address Iface Flags Ref State Stale(sec) Delete(sec) %4s%4s%4s%4s%4s%4s%4s%4s %02x %02x %02x %02x %08lx %08lx %08lx %04x %04x %04lx %8s %2s%2s%2s%2s%2s%2s %-43s %-17s %-8s %-5s %-3d %-16s Neighbour HW Address Iface Flags Ref State %s: no support for `%s' on this system. Usage: inet6_route [-vF] del Target inet6_route [-vF] add Target [gw Gw] [metric M] [[dev] If] inet6_route [-FC] flush NOT supported Flushing `inet6' routing table not supported NONE SIOCADDRT SIOCDELRT gateway device unknown 10baseT 10base2 coax thick db15 100baseT 100baseTX 100baseFX SIOCGIFCONF compressed bytes /proc/net/dev Device not found %-5.5s %5d %-2d %8llu %6lu %6lu %6lu %8llu %6lu %6lu %6lu [NO FLAGS] %-56s %-9.9s Link encap:%s inet6 addr: %s/%d Scope: Unknown Host Global Compat Site Link MTU:%d Metric:%d Outfill:%d Keepalive:%d DMA chan:%x Memory:%lx-%lx Base address:0x%x Interrupt:%d collisions:%lu txqueuelen:%d compressed:%lu compressed:%lu DYNAMIC MULTICAST MASTER SLAVE ALLMULTI PROMISC NOARP RUNNING NOTRAILERS POINTOPOINT LOOPBACK DEBUG BROADCAST [NO FLAGS] econet addr:%s %s addr:%s Mask:%s Bcast:%s P-t-P:%s Media:%s (auto) HWaddr %s warning: no inet socket available: %s %Lu %lu %lu %lu %lu %Lu %lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %Lu %Lu %lu %lu %lu %lu %lu Warning: cannot open %s (%s). Limited output. %s: error fetching interface information: %s - no statistics available - %4s%4s%4s%4s%4s%4s%4s%4s %02x %02x %02x %02x %20s RX packets:%llu errors:%lu dropped:%lu overruns:%lu frame:%lu TX packets:%llu errors:%lu dropped:%lu overruns:%lu carrier:%lu RX bytes:%llu (%lu.%lu %s) TX bytes:%llu (%lu.%lu %s) EtherTalk Phase 2 addr:%s IPX/Ethernet 802.3 addr:%s IPX/Ethernet 802.2 addr:%s IPX/Ethernet SNAP addr:%s IPX/Ethernet II addr:%s %02X%02X%02X%02X%02X%02X %08lX /proc/net/ipx %08lX:%02X%02X%02X%02X%02X%02X %02x:%02x:%02x:%02x irda %02X- unspec loop /proc/net/nr You cannot start PPP with this program. %02x%02x%02x%02x%02x /proc/net/rose Node address must be ten digits cslip cslip6 adaptive No usable address families found. /proc/net %02x-%02x%02x-%02x%02x STRIP_set_disc(%d): %s strip Metricom Starmode IP %02X:%02X:%02X:%02X:%02X:%02X /proc/net/unix out of virtual memory %d.%d.%d Invalid address /proc/net/x25 Address can't exceed eighteen digits with sigdigits /proc/net/x25_routes Kernel X.25 routing table Destination Iface * %-5s %s/%*d %-5s X.25 not configured in this system. Usage: x25_route [-v] del Target[/mask] [dev] If x25_route [-v] add Target[/mask] [dev] If route: netmask doesn't match route address Modifying `x25' routing cache not supported Flushing `x25' routing table not supported route: bogus netmask %d arcnet ether %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X eui64 %02X-%02X-%02X-%02X-%02X-%02X fddi dlci frad hdlc lapb hippi I^ds8/ .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .eh_frame_hdr .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /usr/bin/strings -a //usr/sbin/inetd ### /lib/ld-linux.so.2 _Jv_RegisterClasses __gmon_start__ libc.so.6 waitpid getgid recv ungetc sigemptyset memmove snprintf pmap_set __strtol_internal getprotobyname getpid fgets setrlimit dup2 malloc sleep optarg recvfrom socket select setgroups getrpcbyname sigaddset alarm accept strrchr fprintf ctime bind chdir initgroups pmap_unset setsockopt fseek optind setgid read openlog closelog strncpy unlink setenv sendto __strdup _IO_getc listen fork execv sigaction index gettimeofday getopt memset inet_ntoa syslog strcmp getpwnam getservbyname fclose getpeername stderr __ctype_b_loc fwrite __errno_location getgrnam fopen _IO_stdin_used _exit daemon __libc_start_main strlen getrlimit strchr setsid fcntl setuid sigsuspend free sigprocmask getsockname GLIBC_2.3 GLIBC_2.1 GLIBC_2.2 GLIBC_2.0 PTRh [^_] tdf9 [^_] :tu [^] L[^_] [^_] [^_] [^_] [^_] [^_] echo discard daytime chargen /etc/inetd.conf inetd_dummy execv %s: %m setrlimit: %m %d execl %s getgrnam: %s: No such group getpwnam: %s: No such user fork: %m accept (for %s): %m accept, ctrl %d someone wants %s select: %m getrlimit: %m restored %s, fd %d %s: exit signal 0x%x %s: exit status 0x%x %d reaped, status %x %s: unknown rpc service %s/%s: unknown service ADD REDO FREE /var/run/inetd.pid %s/%s: fcntl: %m %s/%s: bind: %m setsockopt (SO_REUSEADDR): %m setsockopt (SO_DEBUG): %m %s/%s: socket: %m pmap_set: %u %u %u %u: %m pmap_set: %u %u %u %u %s/%s: getsockname: %m %s: getproto: %m pmap_unset(%u, %u) pmap_unset(%u, %u) Out of memory. stream unix wait internal internal service %s unknown rpc/ %s/%s: bad rpc version %s: no rpc version dgram seqpacket strdup: %m -%s [%s] Unable to get time of day %.24s %s/%s server failing (looping), service terminated usage: %s [-d] [-q len] [conf] extra conf for service %s/%s (skipped) bump_nofile: cannot extend file limit, max = %d %s: %s rpcprog=%d, rpcvers = %d/%d, proto=%s, wait.max=%d.%d, user.group=%s.%s builtin=%lx server=%s %s: %s proto=%s, wait.max=%d.%d, user.group=%s.%s builtin=%lx server=%s /dev/null @(#) Copyright (c) 1983 Regents of the University of California. All rights reserved. $Id: inetd.c,v 1.15 1997/07/15 03:38:33 dholland Exp $ netkit-base-0.10 $Id: daemon.c,v 1.3 1996/08/14 23:54:14 dholland Exp $ .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss not infected not found ### ### Output of: /usr/bin/strings -a /sbin/init ### /lib/ld-linux.so.2 libc.so.6 waitpid pause ioctl getutid sigemptyset strerror fdopen geteuid getenv __strtol_internal getpid fscanf fgets memcpy execl perror setrlimit dup2 tcflush malloc optarg vsnprintf select putenv sigaddset alarm pipe uname strrchr __ctype_tolower_loc calloc fprintf kill mkfifo reboot chdir optind wait umask signal endutent openlog closelog strncmp strncpy unlink strcasecmp __strdup _IO_getc sigfillset fork strncat sigaction fread gettimeofday getopt memset tcgetattr time syslog strcmp sprintf fclose stderr pututline __ctype_b_loc fwrite access __xstat tcgetpgrp __errno_location exit __fxstat sigdelset fopen __ctype_toupper_loc _IO_stdin_used __libc_start_main strlen updwtmp strchr setutent execvp setsid fcntl re_exec tcsetattr strpbrk raise free sigprocmask __environ __gmon_start__ GLIBC_2.2 GLIBC_2.3 GLIBC_2.1 GLIBC_2.0 PTRh@ QVh@ D$ 1 [^_] [^_] UWVS <[^_] UWV1 [^_] UWVS [^_] D$\= P[^_ D$0F UWVS [^_] exec |Su+ exec < t]< tY t$< t.< t*<#t {,+t; D$D1 D$@1 D$<1 \$Lt) D$L@ miss ing id f ield miss ing acti on f ield D$dng proc ess fiel d to o lo v4f D$dg acti on f ield too lon K(;J(t [^_] |$'St 0123 C 4567f C$89 S012 C 3456 C$789 D$dd miss ing proc ess fiel D$dld miss ing runl evel fie [^_ D$,1 ? /etc/inittab /sbin/sulogin ~~:S:wait:%s Pid %d [id %s] seems to hang %s[%d]: %s No inittab file found #*Ss Enter runlevel: 0123456789S QS0123456789ABCU Going single user runlevel Re-reading inittab Switching to runlevel: %c Trying to re-exec init bad runlevel: %c S12345 --init Attempt to re-exec failed init [%c] INIT_ /dev/initctl got bogus initrequest error reading initrequest %s is not a fifo Entering runlevel: %c reboot init [S] /etc/powerstatus /var/run/utmp booting reloading t:e: %s: 0123456789SsQqAaBbCcUu %s: -e option data too large single init boot auto AUTOBOOT=YES emergency 0123456789sS %s: must be superuser. /var/log/wtmp /sbin/sulogin GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6) GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6) GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6sarge1) GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6sarge1) GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6sarge1) GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6) GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6sarge1) GCC: (GNU) 3.3.4 (Debian 1:3.3.4-6) .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss .comment ### ### Output of: /usr/bin/strings -a /usr/bin/killall ### /lib/ld-linux.so.2 libc.so.6 stdout readdir64 strerror __strtol_internal getpid fscanf perror malloc sleep optarg opterr fflush strrchr fprintf kill dcgettext optind stdin strncmp strcasecmp realloc _IO_getc __xstat64 opendir getopt_long_only strcmp fgetc asprintf fclose setlocale stderr __ctype_b_loc fwrite __errno_location exit bindtextdomain _IO_putc _IO_stdin_used __libc_start_main strlen strchr closedir getpgid free fopen64 __gmon_start__ GLIBC_2.3 GLIBC_2.1 GLIBC_2.2 GLIBC_2.0 PTRh QVhP [^_] [^_] `G;} ,0< w [^_] [^_] [^_] [^_] Kill %s(%s%d) ? (y/n) pgid /proc realloc /proc/%d/stat %*d (%[^)] %s: no process killed %s is empty (not mounted ?) %s(%d): %s getpgid(%d): %s /proc/%d/exe /proc/%d/cmdline malloc pidof -V killall -l, --list killall -V --version 21.5 pidof %s (psmisc) %s killall exact ignore-case process-group interactive list-signals quiet signal verbose wait version psmisc /usr/share/locale egilqs:vwVI Killed %s(%s%d) with signal %d skipping partial match %s(%d) usage: pidof [ -eg ] name ... -e require exact match for very long names; skip if the command line is unavailable -g show process group ID instead of process ID -V display version information usage: killall [ OPTIONS ] [ -- ] name ... -e,--exact require exact match for very long names -I,--ignore-case- case insensitive process name match -g,--process-group kill process group instead of process -i,--interactive ask for confirmation before killing -l,--list list all known signal names -q,--quiet don't print complaints -s,--signal send signal instead of SIGTERM -v,--verbose report if the signal was successfully sent -V,--version display version information -w,--wait wait for processes to die Copyright (C) 1993-2002 Werner Almesberger and Craig Small PSmisc comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under the terms of the GNU General Public License. For more information about these matters, see the files named COPYING. Maximum number of names is %d QUIT TRAP ABRT KILL USR1 SEGV USR2 PIPE TERM STKFLT CHLD CONT STOP TSTP TTIN TTOU XCPU XFSZ VTALRM PROF WINCH UNUSED %s%s %s: unknown signal; %s -l lists signals. .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: ./strings-static -a /lib/libshow.so /lib/libproc.a ### fopen: No such file or directory ### ### Output of: /usr/bin/strings -a /bin/login ### /lib/ld-linux.so.2 libcrypt.so.1 crypt _Jv_RegisterClasses __gmon_start__ libpam.so.0 pam_get_item _DYNAMIC pam_getenvlist pam_end pam_chauthtok pam_authenticate pam_close_session _init pam_setcred pam_open_session pam_set_item pam_acct_mgmt _fini pam_fail_delay pam_strerror _GLOBAL_OFFSET_TABLE_ pam_start libpam_misc.so.0 misc_conv libc.so.6 strcpy chroot chown sysconf sigemptyset snprintf getenv __strtol_internal getnetname getpid fgets key_setsecret perror execle getuid feof malloc isatty endpwent siglongjmp optarg getutent setgroups __strtoul_internal ruserok fflush lseek getsecretkey chmod alarm __sigsetjmp strrchr ulimit fprintf kill setpwent dcgettext chdir initgroups endgrent optind stdin wait umask ferror setgid signal read endutent openlog closelog strncmp strncpy strcasecmp realloc __strdup strtok fork sscanf sigaction gettimeofday getopt localtime memset tcgetattr getgroups syslog strcmp ttyname getpwnam endspent gethostname sprintf fclose setlocale stderr pututline srandom __ctype_b_loc strftime fwrite access __xstat rewind __errno_location exit __fxstat bindtextdomain setbuf getgrnam fopen _IO_putc fileno _IO_stdin_used __libc_start_main strlen updwtmp strchr setutent fputs setuid tcsetattr dcngettext free __environ _edata __bss_start GLIBC_2.0 GLIBC_2.3 GLIBC_2.2 GLIBC_2.1 PTRh0 ;-t% [^_] 8*u+ [^_] ,0< >/t& [^_] 8/tU [^_] [^_] [^_] [^_] [^_] [^_] [^_] 8/tP [^_] [^_] 8/t' tY9Z [^_] LOGI [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] usage: %s [-p] [name] %s [-p] -r host ERASECHAR KILLCHAR LANG ENV_HZ ENV_TZ /usr/share/locale d:f::h:pr: REMOTEHOST login UMASK ULIMIT on `%.100s' from `%.200s' LOGIN_TIMEOUT FAIL_DELAY LOGIN_RETRIES %s login: UNKNOWN Login incorrect FTMP_FILE CLOSE_SESSIONS HUSHLOGIN=FALSE TTYTYPE_FILE ROOT LOGIN %s FAKE_SHELL LOG_OK_LOGINS `%s' logged in %s TERM HUSHLOGIN=TRUE login: failure forking: %s IFS= LOG_UNKFAIL_ENAB Couldn't initialize PAM: %s on `%.100s' %s: permission denied %s [-p] [-h host] [-f name] Login timed out after %d seconds. FAILED LOGIN (%d)%s FOR `%s', %s login: abort requested by PAM PAM_ABORT returned from pam_authenticate() Maximum number of tries exceeded (%d) TOO MANY LOGIN TRIES (%d)%s FOR `%s' login: PAM Failure, aborting: %s TTYGROUP /dev/%s TTYPERM Unable to change tty %s unable to change tty `%s' for user `%s' unable to determine TTY name, got %s _RLD_= BASH_ENV= HOME= IFS= KRB_CONF= LIBPATH= MAIL= NLSPATH= SHELL= SHLIB_PATH= LANG= LANGUAGE= %s=%s Environment overflow You may not change $%s /var/log/faillog %A %T %d failures since last login. Last was %s on %s. %d failure since last login. Last was %s on %s. HUSHLOGIN_FILE %s/%s Could not set %s's secret key: is the keyserv daemon running? Password does not decrypt secret key for %s. initgroups setgid setuid CONSOLE_GROUPS Warning: add_groups initgroups failed for user `%s': %m bad group ID `%d' for user `%s': %m bad user ID `%d' for user `%s': %m ENV_SUPATH USER LOGNAME QMAIL_DIR MAILDIR MAIL MAIL_FILE /var/mail PATH=/bin:/usr/bin ENV_PATH DEFAULT_HOME Unable to cd to "%s" No directory, logging in with HOME=/ unable to cd to `%s' for user `%s' Cannot execute %s Can't change root directory to "%s" no subsystem root `%s' for user `%s' invalid root `%s' for user `%s' Invalid root directory "%s" %s %s TZ=CST6CDT /dev/ /var/log/wtmp Unable to determine your tty name. No utmp entry. You must exec "login" from the lowest level "sh" malloc(%d) failed Warning: too many groups Warning: unknown group %s CHFN_AUTH CHFN_RESTRICT CRACKLIB_DICTPATH CREATE_HOME DIALUPS_CHECK_ENAB ENVIRON_FILE ENV_ROOTPATH FAILLOG_ENAB GETPASS_ASTERISKS GID_MAX GID_MIN ISSUE_FILE LASTLOG_ENAB LOGIN_STRING MAIL_CHECK_ENAB MD5_CRYPT_ENAB MOTD_FILE NOLOGINS_FILE NOLOGIN_STR NO_PASSWORD_CONSOLE OBSCURE_CHECKS_ENAB PASS_ALWAYS_WARN PASS_CHANGE_TRIES PASS_MAX_DAYS PASS_MAX_LEN PASS_MIN_DAYS PASS_MIN_LEN PASS_WARN_AGE PORTTIME_CHECKS_ENAB QUOTAS_ENAB SULOG_FILE SU_NAME SU_WHEEL_ONLY SYSLOG_SG_ENAB SYSLOG_SU_ENAB UID_MAX UID_MIN USERDEL_CMD USERGROUPS_ENAB Could not allocate space for config info. could not allocate space for config info configuration error - unknown item '%s' (notify administrator) unknown configuration item `%s' cannot open login definitions %s [%m] /etc/gshadow Password: crypt /dev/tty /bin/sh /bin/sh /etc/login.defs .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /usr/bin/strings -a /bin/ls ### /lib/ld-linux.so.2 __gmon_start__ libc.so.6 _IO_stdin_used __libc_start_main ld-linux.so.2 stdout fputs printf setlocale bindtextdomain textdomain time exit malloc fopen strcpy fgets fclose free _obstack_begin _IO_putc isatty abort getenv _nl_msg_cat_cntr error optarg getopt_long optind memcpy strcmp __errno_location opendir readdir closedir _obstack_newchunk sprintf fnmatch __xstat __lxstat readlink strrchr strncpy qsort ctime __ctype_b stpcpy strncmp stderr fprintf _nl_default_dirname _nl_domain_bindings getcwd __rawmemchr open __fxstat mmap close read munmap bsearch strchr feof strcasecmp __ctype_tolower getpwuid getpwnam getgrgid getgrnam realloc __strtol_internal GLIBC_2.0 GLIBC_2.1 PTRh QVhP [^_] [^_] tkQh) [^_] t$Qj t$Rj t$Vj t$Sj t$Rj t$Vj t$Rj t$Vj <=t. t/<:t+ [^_] :uW@ t$Pj :=u* t$Sj [^_] [^_] t&Vht [^_] [^_] S}=1 RPVj y*Vht [^_] y(Vht [^_] [^_] [^_] @L+BL] @L+BL] @D+BD] @D+BD] @<+B<] @<+B<] @0+B0] @0+B0] [Zj. [^_] Y[j. [^_] BdHP [^_] YXSV [^_] [^_] WVS1 [^_] WVS1 [^_] WVS1 [^_] [^_] t$Rj t$Pj t$Qj t$Rj t$Pj [^_] [^_] [^_] [^_] [^_] [^_] [^_] u @P u$@P u,@P u0@P u4@P u8@P [^_] WVS1 AC;] +u:1 tNQV [^_] [^_] x xt @ t] 9>t^ [^_] [^_] 9>t^ [^_] [^_] E^tf E^tJ E^t. [^_] 01;32 01;33 01;35 01;36 01;34 8bit 7bit color version help time tabsize sort format recursive quote-name literal dereference ignore file-type classify ignore-backups almost-all width size reverse hide-control-chars no-group numeric-uid-gid kilobytes inode full-time dired directory escape single-column vertical across horizontal commas long verbose extension none status ctime access atime if-tty auto never force always /usr/local/share/locale fileutils (GNU fileutils) 4.0x vdir %s %s Written by Richard Stallman and David MacKenzie. Copyright (C) 2000 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. /dev/ttyof //DIRED// //SUBDIRED// POSIXLY_CORRECT COLUMNS ignoring invalid width in environment variable COLUMNS: %s TABSIZE ignoring invalid tab size in environment variable TABSIZE: %s abcdfgiklmnopqrstuw:xABCDFGI:LNQRST:UX178 invalid line width: %s invalid tab size: %s sort type time type format type colorization criterion LS_COLORS unrecognized prefix: %s unparsable value for LS_COLORS environment variable total %u %*lu %*u %s %3u %-8u %-8.8s %3u, %3u %8lu -> \%03o Try `%s --help' for more information. Usage: %s [OPTION]... [FILE]... List information about the FILEs (the current directory by default). Sort entries alphabetically if none of -cftuSUX nor --sort. -A, --almost-all do not list implied . and .. -a, --all do not hide entries starting with . -B, --ignore-backups do not list implied entries ending with ~ -b, --escape print octal escapes for nongraphic characters -C list entries by columns -c sort by change time; with -l: show ctime --color[=WHEN] control whether color is used to distinguish file types. WHEN may be `never', `always', or `auto' -D, --dired generate output designed for Emacs' dired mode -d, --directory list directory entries instead of contents -F, --classify append a character for typing each entry -f do not sort, enable -aU, disable -lst --format=WORD across -x, commas -m, horizontal -x, long -l, single-column -1, verbose -l, vertical -C --full-time list both full date and full time -G, --no-group inhibit display of group information -g (ignored) -I, --ignore=PATTERN do not list implied entries matching shell PATTERN -i, --inode print index number of each file -k, --kilobytes use 1024 blocks, not 512 despite POSIXLY_CORRECT -L, --dereference list entries pointed to by symbolic links -l use a long listing format -m fill width with a comma separated list of entries -N, --literal print raw entry names (don't treat e.g. control characters specially) -n, --numeric-uid-gid list numeric UIDs and GIDs instead of names -o use long listing format without group info -p append a character for typing each entry -Q, --quote-name enclose entry names in double quotes -q, --hide-control-chars print ? instead of non graphic characters -R, --recursive list subdirectories recursively -r, --reverse reverse order while sorting -S sort by file size -s, --size print block size of each file --sort=WORD ctime -c, extension -X, none -U, size -S, status -c, time -t --time=WORD atime -u, access -u, use -u -T, --tabsize=COLS assume tab stops at each COLS instead of 8 -t sort by modification time; with -l: show mtime -U do not sort; list entries in directory order -u sort by last access time; with -l: show atime -w, --width=COLS assume screen width instead of current value -x list entries by lines instead of by columns -X sort alphabetically by entry extension -1 list one file per line --help display this help and exit --version output version information and exit By default, color is not used to distinguish types of files. That is equivalent to using --color=none. Using the --color option without the optional WHEN argument is equivalent to using --color=always. With --color=auto, color codes are output only if standard output is connected to a terminal (tty). messages /usr/local/share/locale POSIX LC_COLLATE LC_CTYPE LC_MONETARY LC_NUMERIC LC_TIME LC_MESSAGES LC_ALL LC_XXX LANGUAGE LANG /usr/local/share/locale:. /locale.alias %s: invalid ambiguous %s `%s' Memory exhausted GCC: (GNU) egcs-2.91.66 19990314/Linux (egcs-1.1.2 release) GCC: (GNU) egcs-2.91.66 19990314/Linux (egcs-1.1.2 release) GCC: (GNU) egcs-2.91.66 19990314/Linux (egcs-1.1.2 release) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 .symtab .strtab .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_d .gnu.version_r .rel.got .rel.bss .rel.plt .init .plt .text .fini .rodata .data .got .dynamic .sbss .bss .comment .note ### ### Output of: /usr/bin/strings -a /usr/sbin/lsof ### /lib/ld-linux.so.2 _Jv_RegisterClasses __gmon_start__ libc.so.6 longjmp putchar strcpy getservent getgid stdout getdtablesize setservent readdir64 strerror geteuid inet_pton snprintf getegid getpid qsort fgets memcpy readlink tolower getuid rewinddir malloc sleep strtoul gethostbyaddr clnt_create fflush xdr_void strncasecmp bzero alarm strtol pipe strrchr calloc write fprintf kill wait umask ferror signal read strncmp strncpy strcasecmp htonl realloc fork regcomp memset ntohs getservbyport regexec opendir getrpcbynumber xdr_pmaplist strcmp getpwuid getpwnam getservbyname fclose setlocale regerror stderr __ctype_b_loc access htons __errno_location inet_ntop gethostbyname2 atoi _IO_putc _setjmp endservent _IO_stdin_used _exit __libc_start_main strlen lseek64 strchr fputs closedir free fopen64 __xstat64 __lxstat64 GLIBC_2.3 GLIBC_2.1 GLIBC_2.2 GLIBC_2.0 PTRh` 8/~0 @P;B 8 tE 8 t= 3Y\3AX 0[^] 3Y 3A [^_] 8/tI 84u 8:u l[^_] 8.uN 8/~J 8-t+ 8+t! 8/u! 8-t' [^_] [^_] ;B ~ 8 t gfff x, t ,[^_] 3Y(3A$ 3YD3A@ 3YD3A@ 3YL3AH 3C$ [^_] $Id: dfile.c,v 1.7 2002/02/26 15:20:15 abe Exp $ %s device: %d,%d $Id: dmnt.c,v 1.13 2004/07/06 19:19:44 abe Exp $ %s: can't allocate %d bytes for octal-escaping. %s: can't realloc %d bytes for octal-escaping. %s: can't open(%s): %s %s: %s line %d: no path: "%s" %s: %s line %d: no device: "%s" %s: %s line %d: illegal device: "%s" %s: no space for mount supplement hash buckets %s: %s line %d path duplicate of %d: "%s" %s: no space for mount supplement entry: %d "%s" %s: no space for mount supplement path: %d "%s" %s: error reading %s /proc %s/mounts %s: can't fopen(%s) (pid autofs pipefs sockfs Output information may be incomplete. %s: WARNING: can't stat() file system assuming dev=%#lx from %s %s: can't allocate mounts struct for: %s %#lx $Id: dnode.c,v 1.14 2004/07/06 19:19:44 abe Exp $ %s: can't allocate %d bytes for field pointers. %s: can't allocate %d lock hash bytes %s: can't allocate llock: PID %d; dev %x; inode %ld FIFO LINK *%03d %04d unknown inode type unknown (%s) $Id: dproc.c,v 1.15 2004/07/06 19:19:44 abe Exp $ /proc %s: can't allocate %d bytes for "%s/" locks net/ %s: can't open %s %s: can't allocate %d bytes for "%s/%s/" stat cwd (readlink: %s) (stat: %s) root rtd maps %s (opendir: %s) NOFD lstat: %s) %s/%d/fd/%d %s: WARNING: can't report offset; disregarding -o. %s: can't allocate %d bytes for %s%s %s: can't allocate %d bytes for saved maps, PID %d (deleted) (path dev=%d,%d%s (path %sinode=%ld) %s: can't allocate %d bytes for command "%s" %s: PID %ld: no statEx path space: %s $Id: dsock.c,v 1.25 2004/07/06 19:19:44 abe Exp $ LISTENING SABM SENT DISC SENT ESTABLISHED RECOVERY %s: can't allocate %d AX25 hash pointer bytes %s: can't allocate %d destination AX25 addr bytes: %s %s: can't allocate %d source AX25 address bytes: %s %s: can't allocate %d destination AX25 dev bytes: %s %s: can't allocate %d byte ax25sin structure %s: can't allocate %d IPX hash pointer bytes Local_Address Remote_Address Tx_Queue Rx_Queue State Inode %s: WARNING: unsupported format: %s Not_Connected %s: can't allocate %d local IPX address bytes: %s %s: can't allocate %d remote IPX address bytes: %s %s: can't allocate %d byte ipxsin structure ax25 raw6 tcp6 udp6 unix %s: can't allocate %d raw hash pointer bytes local_address rem_address inode %s: can't allocate %d local raw address bytes: %s %s: can't allocate %d remote raw address bytes: %s %s: can't allocate %d remote raw state bytes: %s %s: can't allocate %d byte rawsin structure %s: can't allocate %d bytes for TCP&UDP hash buckets tx_queue rx_queue %s: can't allocate %d bytes for tcp_udp struct %s: can't allocate %d raw6 hash pointer bytes remote_address %s: can't allocate %d local raw6 address bytes: %s %s: can't allocate %d remote raw6 address bytes: %s %s: can't allocate %d remote raw6 state bytes: %s %s: can't allocate %d byte rawsin structure for IPv6 %s: can't allocate %d bytes for TCP6&UDP6 hash buckets %s: can't allocate %d bytes for tcp_udp6 struct %s: can't allocate %d bytes for Unix socket info RefCount Protocol Flags Type Path %s: can't allocate %d bytes for UNIX PCB: %s 0x%s %s: can't allocate %d bytes for UNIX path "%s" %s: can't allocate %d bytes for uxsin struct %s%s%s (Sq=%lu %sRq=%lu %sState=%d %s%s) %s: can't allocate %d bytes for AX25 sock state, PID: %d (Tx=%lx Rx=%lx State=%02x) %s: can't allocate %d bytes for IPX sock state, PID: %d SYN_SENT SYN_RECV FIN_WAIT1 FIN_WAIT2 TIME_WAIT CLOSE CLOSE_WAIT LAST_ACK LISTEN CLOSING CLOSED UNKNOWN_TCP_STATE_%d %cST=%s%c QR=%lu QS=%lu IPv4 %.*s IPv6 ->%s %sst=%s sock can't identify protocol $Id: dstore.c,v 1.1 97/12/30 08:15:40 abe Exp $ $Id: arg.c,v 1.43 2004/03/10 23:42:49 abe Exp $ %s: illegal FD range for -d: %s: non-digit in -d FD range: %s: -d FD range's low >= its high: %s: no space for mount pointers %s: not a file system: %s: no space for files %s: status error on : %s %s: no space for file name: %s: no space for file system name: %s: no space for argument file name: %s: regexp doesn't begin with '/': %s: regexp doesn't end with '/': %s: b regexp modifier already used: %s: b and x regexp modifiers conflict: %s: i regexp modifier already used: %s: x regexp modifier already used: %s: invalid regexp modifier: %c %s: no regexp space for: %s: no space for regexp: %s: regexp error: %s: no file descriptor specified %s: no space for fd string: %s%s %s%d-%d %s%d exclude include %s: %s in an %s -d list: %s %s: no space for FD list entry %s: no space for copy of: %s %s: +d not followed by a directory path %s: WARNING: can't stat( ): %s %s: WARNING: not a directory: %s: WARNING: can't opendir( %s: no space for path to entries in directory: %s %s: no space for: %s: WARNING: can't lstat( ) symbolc link: %s %s: WARNING: no files found in directory: group %s: no process%s ID specified %s: enter_id " ", invalid type: %d %s: illegal process%s ID: %s: no space for %d process%s IDs %s: no network address specified %s: no space for protocol name from: -i %s: unknown protocol name (%s) in: -i %s: unacceptable Internet address in: -i %s: IPv4 addresses are prohibited: -i %s: IPv6 addresses are prohibited: -i %s: no space for host name: -i %s: unknown host name (%s) in: -i %s: unacceptable port specification in: -i %s: invalid service name: -i %s: no space for service name: -i %s: unknown service %s for %s in: -i %s: unknown service %s in: -i %s: TCP=%d and UDP=%d %s ports conflict; specify "tcp:%s" or "udp:%s": -i %s: no space for Internet argument: -i %s: incomplete Internet address specification: -i %s: network address limit (%d) exceeded: -i %s: no space for network address from: -i %s: missing %s option value %s: no string copy space: %s: no list space: %s: no UIDs specified %s: -u login name > %d characters: %s: can't get UID for %s: UID %d has been included and excluded %s: no space for UIDs %s: no space for login: $Id: main.c,v 1.46 2004/07/06 19:09:32 abe Exp $ /dev/null %s: no space for name buffer ?a%sbc:D:d:%sf:F:g:hi:%slL:%sMnNo:Op:Pr:%ssS:tT:u:UvVwx:%s%s %s: +c not followed by width number %s: unsupported option: -D %s: unknown string for %cf: %s %s: unknown field: %c %s: no number may follow -L %s: -m not supported %s: %cm not supported %s: WARNING: -S time (%d) changed to %d %s: unsupported TCP/TPI info selection: %c %s: unknown cross-over option: %c %s: unknown option (%c) %s: -o and -s are mutually exclusive %s: -f and -t are mutually exclusive %s: -x must accompany +d or +D %s: can't realloc UID table %s: no select options to AND via -a /dev %s: can't stat(%s): %s 0t%%%su %%%su %%*%su %%#%sx %s: no space for %d sort pointers ======= %s: command not located: %s: no command found for regex: system %s: no file%s use located: %s: Internet address not located: (unknown) %s: no Internet files located %s: no NFS files located %s: process ID not located: %d %s: process group ID not located: %d %s: login name (UID %lu) not located: %s: user ID not located: %lu %s: colon is an illegal option character. %s: illegal option character: %c %s: can't allocate %d bytes for format: %s $Id: misc.c,v 1.22 2002/04/29 17:11:04 abe Exp $ %s: WARNING -- child process %d may be hung. %s: doinchild error; response buffer too large: %d %s: can't open pipes: %s %s: can't fork: %s %s: no more dev_ch space at PID %d: %s: no more nm space at PID %d for: %s: WARNING: access %s: %s %s: avoiding stat(%s): -b was specified. %s: avoiding readlink( ): -b was specified. %s: readlink() path too long: %s: no Readlink string space for %s: too many (> %d) symbolic links in readlink() path: \x%02x %s: no space for directory stack at: %s: no space for: $Id: node.c,v 1.5 2000/08/01 17:08:05 abe Exp $ 0x%08lx $Id: print.c,v 1.45 2004/03/12 14:52:01 abe Exp $ localhost %s: can't allocate space for portmap entry: %s: can't allocate porttab entry for portmap: %s: can't allocate %d bytes for port %d name: %s %s: can't allocate porttab entry for port %d: %s can't format IPv6 address] %u.%u.%u.%u (unknown AF value: %d) %s: no space for host name: %s: no space for host cache portmap port %s: can't allocate %d bytes for %s %s hash buckets %s: can't allocate porttab entry for port %d %s: can't allocate space for port name: COMMAND %-*.*s %*s PPID %*s PGID TYPE USER %*s %*s %*s DEVICE OFFSET SIZE SIZE/OFF NLINK NAME NODE %*s %s (unknown) %*d %*.*s %s%c%c %*.*s%c%c %d,%d %*.*s %ld %#lx network addresses too long ICMP ICMPV6 IGMP HOPOPTS IPIP IPV6 ROUTING FRAGMNT RSVP NONE DSTOPTS %.*s *%d? COMMON: %u/%u,%u,%u,%u,%u,%u,%u,%u,%u,%u,%u,%u,%u,%u STREAM DGRAM SEQPACKET SOCK_%#x SOCK_%s /etc/passwd %s: can't stat(/etc/passwd): %s %s: no space for %d byte UID cache hash buckets %s: no pwd entry for UID %lu %s: no space for UID cache entry for: %lu, %s) %*lu UNSPEC UNIX INET INET6 DECnet APPLETALK ROUTE no further information on family %#x %sAF_%s no further information on %sAF_%s %s: can't allocate %d bytes for portmap name: %s[%s] %s[%s] $Id: proc.c,v 1.36 2004/03/10 23:44:14 abe Exp $ %s: no name addition space: PID %ld, FD %s %s: no local file space at PID %d *%03d %s: no malloc space for %d local proc structures %s: no realloc space for %d local proc structures %s: PID %d, no space for command name: %c%d%c (unknown) %c%s%c %c%c%c %c0x%lx%c %c%lu%c %c%ld%c STR: $Id: store.c,v 1.33 2004/07/06 19:09:32 abe Exp $ NODE-ID access: r = read; w = write; u = read/write command name file struct share count device character code major/minor device number as 0x file descriptor file struct address as 0x file flaGs inode number link count lock: r/R = read; w/W = write; u = read/write login name marker between repeated output comment, name, Internet addresses file struct node ID as 0x file offset as 0t or 0x process ID (PID) process group ID (PGID) protocol name raw device number as 0x paRent PID file size stream module and device names file type TCP/TPI info user ID (UID) zone name (zero) use NUL field terminator instead of NL $Id: usage.c,v 1.22 2004/07/06 19:09:32 abe Exp $ disabled %sernel ID check %s%s%s. Anyone %s%s can list all files%s %s/dev warnings %s%s%s%s ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/ 4.72 %s %s latest revision: %s latest FAQ: %sFAQ latest man page: %slsof_man usage: [-?ab%shlnNoOP%sstUvV%s] [+|-c c] [+|-d s] [+%sD D] [+|-f%s] [-F [f]] [-g [s]] [-i [i]] [+|-L [l]] [+m [m]] [+|-M] [-o [o]] [-p s] [+|-r [t]] [-S [t]] [-T [t]] [-u s] [+|-w] [-x [fl]] [--] [names] Use the ``-h'' option to get more help information. Defaults in parentheses; comma-separate set (s) items; dash-separate ranges. -?|-h list help %-23.23s -a AND selections (OR) %-25.25s -b avoid kernel blocks %s -c c cmd c, /c/[bix] +c w COMMAND width (%d) +d s dir s files -d s select by FD set +D D dir D tree *SLOW?* [46] -i select IPv%s files -l list UID numbers -n no host names -N select NFS files -o list file offset -O avoid overhead *RISKY* -P no port names -R list paRent PID -s list file size -t terse listing -T disable TCP/TPI info -U select Unix socket -v list version info -V verbose search +|-w Warnings (%s) -- end option scan +f|-f +filesystem or -file names %-36.36s -F [f] select fields; -F? for help +|-L [l] list (+) suppress (-) link counts < l (0 = all; default = 0) +m [m] use|create mount supplement +|-M portMap registration (%s) -o o o 0t offset digits (%d) -p s select by PID set -S [t] t second stat timeout (%d) -T %s%ss%s TCP/TPI %s%sSt%s (s) info -g [s] select by process group ID set and print process group IDs -i i select by IPv%s address: [%s][proto][@host|addr][:svc_list|port_list] +|-r [t] repeat every t seconds (%d); + until no files, - forever -u s exclude(^)|select login|UID set s -x [fl] cross over +d|+D File systems or symbolic Links names select named files or files on named file systems %s: ID field description %c %s %s version information: revision: %s latest revision: %s latest FAQ: %sFAQ latest man page: %slsof_man configuration info: %s Sun Aug 8 07:30:10 UTC 2004 constructed: %s cyberhq root buildd by and on constructed %s: %s%s%s builder's comment: %s compiler: %s 3.3.4 (Debian 1:3.3.4-7) compiler version: %s -DLINUXV=22000 -DGLIBCV=203 -DHASIPv6 -D_FILE_OFFSET_BITS=64 -DLSOF_VSTR="2.2" -g -Wall compiler flags: %s -L./lib -llsof loader flags: %s Linux cyberhq 2.6.8-rc2-bk1 #1 SMP Fri Jul 23 00:10:47 PDT 2004 i686 GNU/Linux system info: %s K $Id: isfn.c,v 1.8 2003/06/12 21:36:08 abe Exp $ %s: can't allocate space for %d (dev,ino) hash buckets %s: can't allocate space for %d rdev hash buckets %s: can't allocate space for %d file sys hash buckets %s: can't allocate space for %d name hash buckets %s: can't allocate hsfile bucket for: %s (%s) @(#) Copyright 1997 Purdue Research Foundation. All rights reserved. @(#) Copyright 1997 Purdue Research Foundation. All rights reserved. @(#) Copyright 1997 Purdue Research Foundation. All rights reserved. @(#) Copyright 1997 Purdue Research Foundation. All rights reserved. @(#) Copyright 1997 Purdue Research Foundation. All rights reserved. @(#) Copyright 1997 Purdue Research Foundation. All rights reserved. @(#) Copyright 1994 Purdue Research Foundation. All rights reserved. @(#) Copyright 1994 Purdue Research Foundation. All rights reserved. @(#) Copyright 1994 Purdue Research Foundation. All rights reserved. @(#) Copyright 1994 Purdue Research Foundation. All rights reserved. @(#) Copyright 1994 Purdue Research Foundation. All rights reserved. @(#) Copyright 1994 Purdue Research Foundation. All rights reserved. @(#) Copyright 1994 Purdue Research Foundation. All rights reserved. @(#) Copyright 1998 Purdue Research Foundation. All rights reserved. @(#) Copyright 1997 Purdue Research Foundation. All rights reserved. .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /usr/bin/strings -a /usr/bin/mail ### /lib/ld-linux.so.2 liblockfile.so.1 lockfile_create _DYNAMIC lockfile_remove _init _fini _GLOBAL_OFFSET_TABLE_ _Jv_RegisterClasses __gmon_start__ libc.so.6 strcpy unsetenv warnx waitpid ioctl getgid stdout cfgetospeed getlogin ungetc sigemptyset utimes fdopen geteuid snprintf getenv fchmod __strtol_internal qsort fgets memcpy creat errx dup2 getuid malloc isatty optarg fflush ftruncate lseek sigaddset strncasecmp abort pipe strrchr __ctype_tolower_loc calloc fprintf kill ctime strcat chdir fseeko fseek optind stdin umask __progname ferror setgid signal read strncmp wordexp strncpy unlink strcasecmp realloc __strdup _IO_getc wordfree execv sigaction gettimeofday getopt memset lockf ftell clearerr tcgetattr strcmp getpwuid getpwnam fclose stderr mkstemp vfork sigismember fputc __ctype_b_loc fwrite access __xstat rewind __errno_location __fxstat fopen _IO_putc fileno __ctype_toupper_loc _IO_stdin_used _exit __libc_start_main strlen strchr fputs execvp warn fcntl setuid tcsetattr strpbrk raise sigprocmask program_invocation_short_name _edata __bss_start _end GLIBC_2.3 GLIBC_2.1 GLIBC_2.0 PTRh QVhP* [^_] < tH< tD [^_] :< t [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] tF~- [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] L[^_] #t6 [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] [^_] 8-t1 [^_] [^_] [^_] :|t5 [^_] <+t% Reply-To: %s Subject: %s No message, no subject; hope that's ok Can't send mail: sendmail process failed Null message body; hope that's ok $OpenBSD: strings.c,v 1.8 2003/06/03 02:56:11 millert Exp $ String too large No room for space %d $OpenBSD: temp.c,v 1.14 2003/06/03 02:56:11 millert Exp $ TMPDIR /tmp/ NONE user = %s, homedir = %s nobody "%s" is not a user of this system $OpenBSD: tty.c,v 1.17 2003/06/03 02:56:11 millert Exp $ Bcc: Cc: Subject: To: tcgetattr too long to edit $OpenBSD: vars.c,v 1.10 2003/06/03 02:56:11 millert Exp $ /bin/sh /bin/ls /usr/bin/pager "%s": not a group .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .text .fini .rodata .data .eh_frame .dynamic .ctors .dtors .jcr .got .bss ### ### Output of: /bin/ls -l /usr/bin/mail ### -rwxr-xr-x 1 root root 78776 Nov 13 16:27 /usr/bin/mail not found ### ### Output of: /usr/bin/strings -a /bin/netstat ### /lib/ld-linux.so.2 __gmon_start__ libc.so.6 _IO_stdin_used __libc_start_main ld-linux.so.2 malloc fopen strtok __strtol_internal strcpy fgets fclose inet_ntoa strstr __errno_location perror stderr fprintf feof sscanf sprintf strcat printf getpwuid memcpy rindex __ctype_b strncmp strchr memset ioctl strerror socket close exit optarg getopt_long sleep getnetbyname gethostbyname __h_errno_location gethostbyaddr getnetbyaddr herror __ctype_toupper setservent __strdup getservent endservent strrchr free strcmp index strncpy __strtoul_internal GLIBC_2.1 GLIBC_2.0 PTRh j~h` UWVS YZSP YZSP [^_] UWVS t#h2 t$ph D$TH D$Do D$D( D$D2 D$D< D$DF D$DL D$DT D$D_ D$Dh D$|P XZSV ^_SU t$lh} t$t1 D$tRP ,$XZ t$p1 D$pRP ,$XZ t$th t$th t$th [^_] UWVS t#h: t$ph` D$Do D$|P XZSV ^_SU D$oP t$lh D$wP t$t1 D$tRP ,$XZ D$sP t$p1 D$pRP ,$XZ t$th t$th [^_] UWVS t$dh` L$DQ Y^SU T$H1 D$oP t$lh D$wP t$t1 D$tRP ,$XZ D$sP t$p1 D$pRP ,$XZ t$th t$th@ t$ D$$C D$8H D$@[ D$@Sj D$LP D$LP D$LP \$LS D$pP PVWS t$Lh [^_] t#h2 SPhZ QPhZ uNQS ZYPW [^_] slh sph UWVS lPh` [^_] UWVS l$Hh t$HU t$HS ,[^_] ZYh YXh` YXh` YXh@ XZh` UWVS D$ Ph\ inet [^_] UWVS l$$f [^_] UWVS t$$f T$(t defa ^_PU t=Sj ZYPU ^_UP [^_] UWVSQ < w5 < w Z[^_] UWVS UWVS [^_] UWVS t$0h XZj/V [^_] [^_] [^_] [^_] WVSf UWVS [^_] UWVS [^_] UWVS t$Sf UWVS < we < w= [^_] UWVS t$ 1 l$$f [^_] UWVS D$HP D$HP D$HP D$0P D$LP D$LP D$LP D$LP t$Hh \$dSVj ZYPV ZYPW t$ j t$ %d args netstat: unsupported address family %d ! ESTABLISHED SYN_SENT SYN_RECV FIN_WAIT1 FIN_WAIT2 TIME_WAIT CLOSE CLOSING CLOSE_WAIT LAST_ACK LISTEN UNKNOWN off (0.00/%ld) on (%2.2f/%ld) unkn-%d (%2.2f/%ld) tcp %6ld %6ld %-23s %-23s %-12s %-10s %-10d /proc/net/udp AF INET (udp) %d: %lX:%X %lX:%X %X %lX:%lX %X:%lX %lX %c %s off (0.00/%ld) %c on (%2.2f/%ld) %c unkn-%d (%2.2f/%ld) %c udp %6ld %6ld %-23s %-23s %-12s Y@/proc/net/raw AF INET (raw) raw %6ld %6ld %-23s %-23s %-12s Y@/proc/net/unix AF UNIX Inode Active UNIX domain sockets (including servers) (w/o servers) Proto RefCnt Flags Type State I-Node Path %p: %lX %lX %lX %X %X %s %s unix STREAM DGRAM SEQPACKET FREE LISTENING CONNECTING CONNECTED DISCONNECTING ACC %-5s %-6ld %-11s %-10s %-13s %-6s %s /proc/net/ipx AF IPX Active IPX sockets Proto Recv-Q Send-Q Local Address Foreign Address State User net-tools@lina.inka.de (Bernd Eckenfels) AF_IPX missing netstat.c %s: Internal Error `%s'. Contact: %s %s %s %lX %lX %d %d /proc/net/ipx sport format error Not_Connected /proc/net/ipx dport format error ESTAB UNK. %s:%04X IPX %6ld %6ld %-26s %-26s %-5s %-10s %-10d %-5.5s %5d %3d %6u %6u %6u %6u [NO FLAGS] /proc/net/dev %d %d %d %d %d %d %d %d %d %d %d SIOCGIFFLAGS: %s socket SIOCGIFCONF Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flags %s: unknown interface. usage: netstat [-veenNcCF] [] -r netstat {-V|--version|-h|--help} netstat [-vnNcaeo] [] netstat { [-veenNac] -i | [-vnNc] -L | [-cnNe] -M } -r, --route display routing table -L, --netlink display netlink kernel messages -i, --interfaces display interface table -M, --masquerade display masqueraded connections -v, --verbose be verbose -n, --numeric dont resolve names -e, --extend display other/more informations -c, --continuous continuous listing -a, --all, --listening display all -o, --timers display timers ={-t|--tcp} {-u|--udp} {-w|--raw} {-x|--unix} --ax25 --ipx --netrom = -A {inet|ipx|netrom|ddp|ax25},... --inet --ipx --netrom --ddp --ax25 ax25 appletalk netrom inet tcpip version interfaces help route netlink masquerade protocol listening timers continuous extend verbose numeric symbolic cache MLCFA:acdehinNortuVv?wx/ longopts 1 range RT_NETLINK %s: feature `%s' not supported. Please recompile `net-tools' with newer kernel source or full configuration. FW_MASQUERADE Active Internet connections Proto Recv-Q Send-Q Local Address Foreign Address State User Timer AF AX25 AF NETROM default 255.255.255.255 [NONE SET] inet netstat tcpip unix netrom appletalk inet ax25 UNSPEC UNIX Domain DARPA Internet Please don't supply more than one address family. Too much address family arguments. Unknown address family `%s'. Address family `%s' not supported. No routing for address family `%s'. %02X- [NONE SET] unix unspec %08lX:%02X%02X%02X%02X%02X%02X %08lX %02X%02X%02X%02X%02X%02X [NONE SET] /proc/net/route INET FIB getroute %s: no support for `%s' on this system. Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface Destination Gateway Genmask Flags MSS Window irtt Iface Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt %s %s %s %X %d %d %d %s %d %d %d %-15s - %-15s %-5s %-6d - %7d - %-15s %-15s %-15s %-5s %-6d %-2d %7d %s %-15s - %-15s %-5s - - - - %-15s %-15s %-15s %-5s %5d %-5d %6d %s %-15s - %-15s %-5s %-6d - %7d - - - - %-15s %-15s %-15s %-5s %-6d %-3d %6d %-6.6s %-5d %-6d %d /proc/net/rt_cache INET CACHE Kernel IP routing cache INET CACHE: This needs to be written! Kernel IPX routing table net-tools@lina.inka.de (Bernd Eckenfels) AF_IPX missing lib/ipx_rt.c %s: Internal Error `%s'. Contact: %s Destination Router Net Router Node /proc/net/ipx_route %s %s %s %-25s %-25s %-25s GCC: (GNU) egcs-2.91.66 19990314/Linux (egcs-1.1.2 release) GCC: (GNU) egcs-2.91.66 19990314/Linux (egcs-1.1.2 release) GCC: (GNU) egcs-2.91.66 19990314/Linux (egcs-1.1.2 release) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.0) 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 01.01 .symtab .strtab .shstrtab .interp .note.ABI-tag .hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.got .rel.bss .rel.plt .init .plt .text .fini .rodata .data .got .dynamic .sbss .bss .comment .note ### ### Output of: /usr/bin/strings -a /usr/sbin/named ### /lib/ld-linux.so.2 libc.so.6 in6addr_any strcpy chroot waitpid ioctl writev getservent getgid sysconf stdout vsprintf sethostent setservent connect ungetc sigemptyset utimes strerror fdopen memmove getprotobynumber getenv __rawmemchr __res_ninit __strtol_internal getprotobyname getpid qsort fchown fscanf fgets memcpy pclose perror setrlimit getuid feof malloc endpwent sleep optarg recvfrom gethostbyaddr socket readdir __strtoul_internal fflush sigaddset strncasecmp send freeaddrinfo abort endprotoent chmod getnameinfo popen accept rename strrchr __ctype_tolower_loc calloc setprotoent kill ctime strcat bind getprotoent readv chdir initgroups endgrent setsockopt fseek optind umask _res ferror setgid openlog sendmsg strncmp strncpy unlink getrusage strcasecmp sendto realloc __strdup _IO_getc listen sscanf execv sigaction __res_init fread endhostent index gettimeofday getopt localtime memset ftell srand getppid getservbyport opendir __assert_fail syslog strcmp shutdown __h_errno_location __res_state gethostbyname getpwnam getservbyname fgetc gethostname fclose pselect strcspn getpeername stderr mkstemp vfork fsync fputc __ctype_b_loc __strndup getsockopt getaddrinfo __res_randomid fwrite access __xstat rewind gethostent __errno_location __fxstat setbuf getgrnam gethostbyname2 fopen _IO_putc fileno __ctype_toupper_loc endservent _IO_stdin_used _exit gmtime strspn daemon __libc_start_main getrlimit strchr fputs execvp closedir recvmsg fcntl setuid gethostid vfprintf free sigprocmask __res_nclose getsockname __gmon_start__ GLIBC_2.2 GLIBC_2.3 GLIBC_2.1 GLIBC_2.0 PTRh w ;u(9>w [^_] ttf9s [^_] tB9B [^_] ,[^_] [^_] [^_] [^_] D$0 [^_] l[^_] l[^_] [^_] [^_] [^_] [^_] [^_] [^_] <[^_] [^_] [^_] [^_] L[^_] [^_] [^_] C,9H FB;U xt ,[^_] [^_] [^_] \[^_] ^^^^ @ t [^_] @ t |[^_] [^_] @ t [^_] [^_] [^_] ,[^_] L[^_] x ;u \[^_] [^_] [^_] [^_] [^_] ,[^_] ,[^_] .Ath ena. MIT. [^_] ,[^_] :ruB [^_] [^_] [^_] @(#)db_dump.c 4.33 (Berkeley) 3/3/91 $Id: db_dump.c,v 8.56 2004/01/16 02:01:21 vixie Exp $ dumping nameserver data ; Dumped at %s ; --- Cache & Data --- ; --- Hints --- ;; ++zone table++ ; z_addr[%d]: %s[%s] ; update source [%s, %s] ;; --zone table-- ;; ++forwarders table++ ; %s rtt=%d ;; --forwarders table-- $ORIGIN %s. .%s. %s %s NXDOMAIN NODATA %sNT=%d "%.*s" %s. ( %u %u ) ;%s.;%s%s-$ %s. %u %u %u %s. 0x%04x %3u ; BAD BASE64 \# %u %sCr=%s %sCl=%d %sLAME=%ld auth addtnl ?%d? ; Note: Cr=(auth,answer,addtnl,cache) tag only shown for non-auth RR's ; Note: NT=milliseconds for any A RR which we've used as a nameserver finished dumping nameserver data ; %s (type %d, class %d, source %s) ; time=%lu, lastupdate=%lu, serial=%u, ; refresh=%u, retry=%u, expire=%u, minimum=%u ; ftime=%lu, xaddrcnt=%d, state=%04x, pid=%d @(#)db_load.c 4.38 (Berkeley) 3/2/91 $Id: db_load.c,v 8.126 2004/01/16 02:01:22 vixie Exp $ Database db_load.c Normal db_load(%s, %s, %d, %s, %s) db_load: memget failed fstat failed: %s: %s $INCLUDE makename failed db_load: origin %s, buf %s $ORIGIN makename failed db_load: origin now %s $GENERATE missing RANGE %d-%d/%d $GENERATE invalid range $GENERATE missing LHS GENERATE missing TYPE $GENERATE unsupported type $GENERATE missing RHS $GENERATE unsupported context ownername makename failed $TTL bad TTL value Zone "%s" (file %s): %s %s: Line %d: wrong class: %s. %s:%d: owner name error %s: Line %d: meta type: %s. bad name "%s" SOA ")" WKS IP Address NAPTR Order NAPTR Preference NAPTR Flags NAPTR Flags too big NAPTR Service Classes NAPTR Service Classes too big NAPTR Pattern NAPTR Pattern too big NAPTR Replacement NAPTR Replacement too big SRV RR Domain Name PX Priority PX Domain1 PX Domain2 HINFO RR ISDN RR TXT RR X25 RR NSAP RR: no leading 0x NSAP RR Prefix Len A6 Prefix Name opaque length opaque data read failed ")" expected $GENERATE owner name error $GENERATE name error $GENERATE genname RHS failed IPv6 Address $GENERATE genname LHS failed %s:%d: %s error near (%s) no SOA RR found multiple SOA RRs found no NS RRs found at zone top no relevant RRs found update failed %s %d include origin generate %s:%d: Unknown $ option: $%s KkMmGg %s:%d: expected a number %s:%d: unexpected end of line %s:%d: unexpected EOF {%d,%d,%1[doxX]} %%0%dd %%0%d%c %s:%d: makename failed %s:%d: database naming error %s:%d: unknown protocol: %s. %s:%d: Unknown service '%s' %s:%d: port no. (%d) too big %s:%d: missing close paren %s:%d: total RDATA too long SIG error Unknown RR type in SIG record Missing algorithm ID Bad algorithm number Missing label count Bad label count number Original TTL value bad Expiration time missing Invalid expiration time Missing signature time Invalid signature time Missing key footprint Invalid key footprint Missing signer's name Signature block bad No key for RSA algorithm Signature too long DH Signature too short DSS Signature too short DSS Signature too long No ObjectID in key UNKOWN SIG algorithm NXT name error NXT type error CERT type out of range CERT no space CERT doesn't specify type CERT KEY tag out of range CERT missing algorithm ID CERT KEY alg out of range CERT blob has encoding error KEY flags error KEY Reserved Flag Bit KEY Protocol Field KEY Algorithm ID KEY Flags Field Extended key flags error KEY Reserved Flag2 Bit KEY Public Key KEY Zone Key Auth. bit KEY Algorithm KEY Protocols KEY No-Key Flags Set KEY Type Spec'd Exponent too short Exponent too long Exponent w/ 0 Modulus too short Modulus too long Modulus starts w/ 0 DH short plen DH plen > klen DH glen bad DH glen > klen DH ulen bad DH ulen > klen DH *len < klen DSA T value DSA length Unknown Key algorithm unexpected end of input (zp->z_flags & (Z_NEED_DUMP|Z_NEED_SOAUPDATE)) == 0 Required filename not specified for Hint zone db_load could not open: %s: %s %s: Line %d: $GENERATE unknown type: %s. %s:%d: $GENERATE LHS out of zone (ignored) No default TTL ($TTL ) set, using SOA minimum instead %s: Line %d: TTL > %u; converted to 0 %s: Line %d: Unknown type: %s. d='%s', c=%d, t=%d, ttl=%u, data='%s' %s:%d: SOA for "%s" not at zone top "%s" %s:%d: WARNING: new serial number < old (%lu < %lu) zone soa update time truncated to 1/3rd of refresh time %s: Line %d: SOA minimum TTL > %u; converted to 0 %s:%d: data "%s" outside zone "%s" (ignored) %s zone "%s" (%s) rejected due to errors (serial %u) %s zone "%s" (%s) loaded (serial %u) %s:%d:%s: CNAME and OTHER data error %s:%d: expected a TTL, got "%s" %s:%d: number after the decimal point exceeds 9999 %s:%d: decimal serial number interpreted as %d %s:%d: expected %d RDATA fields, only saw %d %s:%d: RDATA field %d too long %s: Line %d: Unknown type: %s in NXT record. %s: WARNING SOA expire value is less than SOA refresh+retry (%u < %u+%u) %s: WARNING SOA expire value is less than refresh + 10 * retry (%u < (%u + 10 * %u)) %s: WARNING SOA expire value is less than 7 days (%u) %s: WARNING SOA expire value is greater than 6 months (%u) %s: WARNING SOA refresh value is less than 2 * retry (%u < %u * 2) SIG record doesn't specify type OTTL and expiration time missing TTL is greater than signed original TTL signature time is in the future expiration time is in the past shrinking expiring %s SIG TTL from %d to %d Signature supplied to expire-only algorithm parse_sec_rdata():Unsupported SEC type type @(#)db_lookup.c 4.18 (Berkeley) 3/21/91 $Id: db_lookup.c,v 8.28 2004/01/16 02:01:22 vixie Exp $ np_parent(0x%lx) couldn't find namebuf @(#)db_save.c 4.16 (Berkeley) 3/21/91 $Id: db_save.c,v 8.32 2004/01/16 02:01:22 vixie Exp $ len >= 0 && len <= (MAXLABEL * 4) savehash(%#lx) cnt=%d, sz=%d, newsz=%d db_save.c savename: memget savedata: memget savedata: bad class savehash GROWING to %d savehash: %s @(#)db_update.c 4.28 (Berkeley) 3/21/91 $Id: db_update.c,v 8.55 2004/01/16 02:01:22 vixie Exp $ hint db_update: hint '%s' %u db_update: hint %p freed %s has multiple CNAMES db_update: new ttl %u +%lu db_update: adding%s %p ++d_rcnt == 0 db_update: DB_F_ACTIVE set db_update(%s, %p, %p,